Thomson scattering diagnostics of SF6gas-blasted arcs confined by a nozzle under free-recovery conditions

Authors:

Abstract
Collective Thomson scattering has been applied to gas-blasted arcs confined by a nozzle to measure their decay processes with respect to electron density ( n e ). Pure SF 6 gas, an Ar/SF 6 gas mixture (SF 6 was 20, 40, 60, and 80% of the mixture), and pure Ar gas were used as arc-quenching media at atmospheric pressure. Copper–tungsten (40% copper) electrodes were installed inside a polytetrafluoroethylene (PTFE) nozzle and 50 mm-long gap arcs were generated between the electrodes. First, steady-state arcs were generated with 50 A current. Then, a semiconductor switch removed the arc current. It was found that after the current decreased to zero, n e exponentially decreased and the decay time constant of n e systematically decreased with an increasing SF 6 gas ratio. Thomson scattering measured n e in the range 10 21 –10 23 m −3 . Self-emission measurements, which were performed with a high-speed camera at 200 000 frames per second, exhibited good agreement with the results of the Thomson scattering.

This publication has 22 references indexed in Scilit: