In Situ Synthesis of Silver Nanoparticles on Flame-Retardant Cotton Textiles Treated with Biological Phytic Acid and Antibacterial Activity
Open Access
Abstract
Fabrics were flame-retardant finished using phytic acid, a cost-effective, ecologically acceptable, and easily available flame-retardant finishing chemical. Then, on the surface of the completed fabric, silver nanoparticles (Ag NPs) were grown in situ to minimize Ag NPs aggregation and heterogeneous post-finishing and to increase washing durability. Thus, flame-retardant and antibacterial qualities were added to textiles. The as-prepared textiles were evaluated for their combustion performance, thermal performance, and antibacterial capabilities. At the same time, their microstructures were studied using X-ray diffractometry (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The findings indicated that flame-retardant textiles had an excellent launderability (limiting oxygen index = 31% after 20 washing cycles). Meanwhile, Ag NPs-loaded flame-retardant textiles demonstrated self-extinguishing properties, with a limiting oxygen index (LOI) of 27%. Bacteriostatic widths of flame-retardant antibacterial textiles against Escherichia coli and Staphylococcus aureus were 5.28 and 4.32 mm, respectively, indicating that Ag NPs-loaded flame-retardant fabrics have certain flame-retardant and antibacterial capabilities. SEM and TEM analysis indicated that nanoparticles were uniformly dispersed over Ag NPs-loaded flame-retardant textiles and were around 20 nm in size. When compared to flame-retardant textiles, Ag NPs-loaded flame-retardant fabrics showed varied binding energy of P and N on the surface and Ag ion emergence. Thermogravimetric analysis at various heating rates revealed that the main pyrolysis temperature range of flame-retardant fabrics decreased, while the main pyrolysis temperature range of Ag NPs-loaded flame-retardant fabrics increased; the heating rate influenced the pyrolysis range but not the fabric mass loss. In situ reduction synthesis of Ag NPs-loaded flame-retardant textiles may successfully reduce agglomeration and heterogeneous dispersion of nano-materials during post-finishing.Keywords
This publication has 37 references indexed in Scilit:
- Synthesis of silver nanoparticles using plants extract and analysis of their antimicrobial propertyJournal of Saudi Chemical Society, 2015
- Antibacterial cotton fabric grafted with silver nanoparticles and its excellent laundering durabilityCarbohydrate Polymers, 2013
- In situ production of silver nanoparticle on cotton fabric and its antimicrobial evaluationCellulose, 2010
- Phytic acid doped nanoparticles for green anticorrosion coatingsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Generation of Ag Nanoparticles by PAMAM Dendrimers and their Size Dependence on the Aggregation Behavior of DendrimersMacromolecular Chemistry and Physics, 2009
- Controlled silver nanoparticles synthesis in semi-hydrogel networks of poly(acrylamide) and carbohydrates: A rational methodology for antibacterial applicationCarbohydrate Polymers, 2009
- Silver nanoparticles: Green synthesis and their antimicrobial activitiesAdvances in Colloid and Interface Science, 2009
- One-step fabrication of silver nanoparticle embedded polymer nanofibers by radical-mediated dispersion polymerizationChemical Communications, 2006
- The bactericidal effect of silver nanoparticlesNanotechnology, 2005
- Preparation of metal nanoparticles in water-in-oil (w/o) microemulsionsAdvances in Colloid and Interface Science, 2004