Development and evaluation of temperature sensors for textile integration
Authors:
- 1 October 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19300395,p. 1580-1583
Abstract
In this paper we report an approach to fully integrate micro fabricated sensors into textiles. We first developed platinum resistance temperature sensors (RTDs) on 500 ¿m-wide, 67.5 mm-long plastic stripes. After completing the sensor fabrication, we used a dicing saw to separate individual sensors by cutting the plastic foil into stripes, each containing an individual sensor and connecting lines. The resistance of the RTDs was 665 ¿ +/- 10 ¿ at room temperature. The temperature coefficient of the RTDs is 0.00223 K-1 with a the sensitivity of 1.52 ¿/°C at a drive current of 500 ¿A. Cutting the substrate did not affect the sensor functionality. We then tested the influence of strain on the stripe RTDs signal using a pulling tester to apply tensile strain. Longitudinal strain resulted in metal line break after 2 N applied force (at an elongation of 5%) and in breaking of the Kapton stripe at 8 N applied force. Single sensor stripes spaced 10 mm apart were integrated into a textile band using a commercial band weaving machine.Keywords
This publication has 9 references indexed in Scilit:
- A novel intelligent textile technology based on silicon flexible skinsSensors and Actuators A: Physical, 2008
- Enhanced adhesion of plasma-sputtered copper films on polyimide substrates by oxygen glow discharge for microelectronicsThin Solid Films, 2008
- Flexible thin film temperature and strain sensor array utilizing a novel sensing conceptSensors and Actuators A: Physical, 2007
- A cost-effective flexible MEMS technique for temperature sensingMicroelectronics Journal, 2007
- Contactless EMG sensors embroidered onto textile2007
- Large Surface Area Electronic Textiles for Ubiquitous Computing: A System Approach2007
- Mechanics of rollable and foldable film-on-foil electronicsApplied Physics Letters, 1999
- Surface modification of Kapton film by plasma treatmentsJournal of Polymer Science Part A: Polymer Chemistry, 1992
- Electrical-Resistivity Model for Polycrystalline Films: the Case of Arbitrary Reflection at External SurfacesPhysical Review B, 1970