Grain and dendrite refinement of A356 alloy with Al–Ti–C–RE master alloy
Authors:
Open Access
- 21 February 2013
- journal article
- Published by Wiley in Rare Metals
- Vol. 32 (1) , 12-17
Abstract
Commercial A356 alloy was refined with a homemade Al–5Ti–0.25C–2RE master alloy, and the microstructure and macrostructure of the refined alloy were investigated. The results show that the grain refining effect of A356 is poor by the addition level of 0.5 wt% master alloy, but when the level reaches 3.0 wt% the grain can get a satisfactory refining effect. Dendrite of A356 can be effectively refined by addition of 0.5 wt% master alloy; however, the refining effect is not significantly improved by further increasing the addition of master alloy. Grain and dendrite refining effects are compared in this article, and the results show that the grain and dendrite exhibit different refining effects with the same addition level of master alloy. Dendrite is easier to reach the optimal refining effect than grain.Keywords
Funding Information
- National Natural Science Foundation of China (51174177)
This publication has 16 references indexed in Scilit:
- The Refinement Effect of Al-Ti-C-RE Master Alloy Prepared by Adding Ce2O3 on Pure AlAdvanced Materials Research, 2010
- Grain refining efficiency and microstructure of Al–Ti–C–RE master alloyJournal of Alloys and Compounds, 2010
- Solidification Observations of Dendritic Cast Al Alloys Reinforced with TiC ParticlesJournal of Materials Engineering and Performance, 2010
- Effect of Alloy Composition on the Dendrite Arm Spacing of Multicomponent Aluminum AlloysMetallurgical and Materials Transactions A, 2010
- Effects of Sc, Zr and Ti on the microstructure and properties of Al alloys with high Mg contentRare Metals, 2010
- A novel Al–Ti–B alloy for grain refining Al–Si foundry alloysJournal of Alloys and Compounds, 2009
- Dynamical solidification behaviors and microstructural evolution during vibrating wavelike sloping plate processJournal of Materials Processing Technology, 2009
- Influence of Mg3N2 powder on microstructures and mechanical properties of AZ31 Mg alloyJournal of Central South University of Technology, 2008
- Microstructural features of as-cast A356 alloy inoculated with Sr, Sb modifiers and Al–Ti–C grain refiner simultaneouslyMaterials Letters, 2008
- Development of Al–Ti–C grain refiners and study of their grain refining efficiency on Al and Al–7Si alloyJournal of Alloys and Compounds, 2005