Integrated Physical Model for Cylindrical Shells
Authors:
- Associate Member Demetres BriassoulisABAssociate Member Demetres Briassoulis
- Asce Associate MemberAMAsce Associate Member
- 1 August 1992
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 118 (8) , 2168-2185
Abstract
An integrated physical model for closed thin‐walled cylindrical shells under nonaxisymmetric pressure is proposed. The model, based on the interaction of the beam‐plate bending, the membrane, and an equivalent ring foundation load‐carrying mechanism, is capable of capturing the overall physical behavior of the shell under both lower and higher load harmonics. The model converges to the beam on elastic foundation model to the Bernoulli‐Euler beam model and to the slice‐beam on elastic foundation model It also accounts for the beam‐plate bending behavior of the shell (even though only approximately for ). The load‐carrying mechanisms activated along the cylindrical shell are determined by the shell geometry and the load harmonic under consideration. For rather shallow and/or thin cylindrical shells and for the lower load harmonics membrane action is shown to represent the dominating load‐carrying mechanism throughout the cylinder. The corresponding edge disturbances, absorbed by a rather weak ring foundation, have very long decay lengths. As the shell becomes thicker and/or taller, and especially for the higher load harmonics the ring action progressively becomes active over a larger portion of the shell.
Keywords
This publication has 7 references indexed in Scilit:
- Load Transfer Mechanisms in Wind‐loaded CylindersJournal of Engineering Mechanics, 1989
- Cylindrical Shell Slice‐BeamJournal of Engineering Mechanics, 1988
- Behaviour of empty steel grain silos under wind loading: part 1: the stiffened cylindrical shellEngineering Structures, 1986
- Anchorage Requirements for Wind‐Loaded Empty SilosJournal of Structural Engineering, 1986
- Effect of End Restraints and Forces on the State of Stress in CircularTransactions of the ASAE, 1985
- Semimembrane Analysis of Cylindrical Shells Subjected to Wind LoadingJournal of Applied Mechanics, 1970
- Stresses in Shells1966