Color stability, surface roughness and flexural strength of additively manufactured and milled interim restorative materials after aging
- 17 December 2022
- journal article
- research article
- Published by Springer Nature in Odontology
- Vol. 111 (3) , 680-686
Abstract
To evaluate the effect of two different additive manufacturing technologies on the color stability, surface roughness and biaxial flexural strength of interim restorative materials after thermal aging. Disk-shaped specimens were manufactured via two types of vat polymerization methods [Stereo-lithography (SLA) and digital light processing (DLP)] and milling technology (n = 16). CIELab color coordinates and surface roughness were measured before and after thermal cycling. Then biaxial flexural strength tests were performed using a universal testing machine. The data were analyzed by Kruskal–Wallis, one-way ANOVA, and Tamhane and Tukey HSD tests (α < 0.05). There was no significant difference among ΔE values of all study groups (p = 0.191). The milled group showed a higher initial surface roughness value (p < 0.05), while there was no significant difference among the other groups after aging (p = 0.213). DLP had significantly lower flexural strength values than SLA and Milled (p = 0.000). After aging, SLA and DLP were similar to milling method, in terms of color stability and surface roughness. However, milling had an adverse effect on the initial surface roughness. The SLA and milled groups had better mechanical properties than the DLP group.Keywords
This publication has 46 references indexed in Scilit:
- Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorationsThe Journal of Advanced Prosthodontics, 2019
- Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resinDental Materials, 2018
- Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thicknessClinical Oral Investigations, 2018
- Additive Manufacturing Technologies Used for Processing Polymers: Current Status and Potential Application in Prosthetic DentistryJournal of Prosthodontics, 2018
- Coloration of provisional restoration materials: a comparison of the effects of mouth rinses and green teaİstanbul Tıp Fakültesi Dergisi, 2018
- Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing systemThe Journal of Advanced Prosthodontics, 2017
- Color Difference Thresholds in DentistryJournal of Esthetic and Restorative Dentistry, 2015
- In vitrostudy of fracture strength of provisional crown materialsThe Journal of Advanced Prosthodontics, 2015
- Dental color matching instruments and systems. Review of clinical and research aspectsJournal of Dentistry, 2010
- Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literatureDental Materials, 1997