Nanoindentation response of poly(ether ether ketone) surfaces—A semicrystalline bimodal behavior
- 20 July 2013
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 130 (6) , 4401-4409
Abstract
Indentation is a relatively simple and virtually nondestructive technique of assessing mechanical properties of materials by an indenter inducing localized deformation into a solid surface. The load–displacement curves, the hardness, and the elastic modulus data together with associated analysis for poly(ether ether ketone) (PEEK) surfaces are presented as a function of contact displacement. The major conclusions are that nanoindentation into the polymer show a surface hardening response that is dependent upon the contact conditions. PEEK, a semicrystalline polymer, has bimodal nanoindentation characteristics because of the presence of hard crystalline lamella within a softer amorphous phase. The bimodal character is confirmed by the load–displacement, the hardness, and the elastic modulus data. The semicrystalline polymer exhibits periodic fluctuations in mechanical properties with the increasing penetration depth. Finally, the nanoindentation is found to be a convenient method to estimate the degree of crystallinity of semicrystalline polymers. The technique may provide a convenient means to understand morphological description of the polymeric surfaces. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4401–4409, 2013Keywords
This publication has 24 references indexed in Scilit:
- Surface Plasticization of Poly(ether ether ketone)European Polymer Journal, 2011
- Effect of surface roughness on nanoindentation test of thin filmsEngineering Fracture Mechanics, 2008
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004
- A review of nanoindentation continuous stiffness measurement technique and its applicationsMaterials Characterization, 2002
- The elastoplastic response of poly(methyl methacrylate) to indentationProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1996
- Application of the compliance method to microhardness measurements of organic polymersPhilosophical Magazine A, 1996
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Studies on interface structure and crystal texture of poly(ether-ether-ketone)-carbon fibre compositeJournal of Materials Science, 1991
- A method for interpreting the data from depth-sensing indentation instrumentsJournal of Materials Research, 1986
- Vickers Indentation Curves of Magnesium Oxide (MgO)Journal of Tribology, 1984