Calculation, design and fabrication of welding heat treatment equipment
Open Access
- 1 January 2023
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2591 (1) , 030081
Abstract
Welded joints, especially those between different types of materials, always have many problems that need to be handled to improve the quality of the welds and the life of the equipment. Welds before heat treatment appear weld stress, crystalline segregation and heterogeneous weld organization. This affects the quality of parts when working, especially those working in long-term conditions, under heavy loads, or constantly changing loads. To ensure the quality of the weld, it is necessary to heat and treat the weld immediately after the welding is completed. Weld heat treatment equipment is the solution that plays an important role in the heat treatment of welds. This study has calculated, designed and manufactured a welding heat treatment device, and at the same time, conducted testing on the device. The test results show that the homogenized microorganism no longer has the phenomenon of segregation or carbide accumulation. In the weld immediately after welding, the hardness is significantly reduced, and the impact toughness is increased. Weld heat treatment equipment is designed to meet the needs of improving weld quality. This study's weld heat treatment equipment responds well to improving weld quality.Keywords
This publication has 46 references indexed in Scilit:
- Simulation and validation of repair welding and heat treatment of an alloy 718 plateFinite Elements in Analysis and Design, 2012
- Effect of a post-weld heat treatment on the mechanical and microstructure properties of AA6061 joints welded by the gas metal arc welding cold metal transfer methodMaterials & Design (1980-2015), 2011
- Microstructural Characterization of Clad Interface in Welds of Ni-Cr-Mo High Strength Low Alloy SteelKorean Journal of Metals and Materials, 2011
- The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded jointsMaterials & Design (1980-2015), 2010
- Single Sensor Differential Thermal Analysis of Phase Transformations and Structural Changes During Welding and Postweld Heat TreatmentWelding in the World, 2007
- Heat treatment in two phase region and its effect on microstructure and mechanical strength after welding of a low carbon steelMaterials & Design (1980-2015), 2007
- Friction stir welding parameters: a tool for controlling abnormal grain growth during subsequent heat treatmentMaterials Science and Engineering: A, 2005
- Influence of accelerated cooling on microstructure and mechanical properties of C -Mn steelsMaterials Science and Technology, 2002
- Developments in Global Seatrade and Container Shipping Markets: Their Effects on the Port Industry and Private Sector InvolvementInternational journal of maritime economics, 2001
- Microstructural changes during welding and subsequent heat treatment of 18Ni (250-grade) maraging steelMaterials Science and Engineering: A, 2000