Numerical simulation on flow and evaporation characteristics of desulfurization wastewater in a bypass flue
Authors:
Open Access
- 1 January 2020
- journal article
- research article
- Published by Taylor & Francis in Engineering Applications of Computational Fluid Mechanics
- Vol. 14 (1) , 411-421
Abstract
Owing to the oversimplification of the evaporation model, existing numerical analysis cannot accurately characterize the evaporation characteristics, which has limited its significance for engineering. Therefore, by user-defined programming, a droplet evaporation model in line with the properties of desulfurization wastewater was implemented in numerical simulation. The effects of guiding measures, nozzle arrangement, nozzle layer, flue gas temperature, moisture and droplet diameter on the droplet evaporation in a bypass flue were explored. The numerical results show that the fluctuation of evaporativity due to moisture can be neglected. The uniformity of the flow field with guiding measures is good and the phenomenon of droplets impinging on the wall surface can be prevented. The droplet collision probability without guiding measures may be nearly 60 times higher than that with guiding measures. A reasonable nozzle arrangement increases the droplet evaporation rate and reduces the probability of droplets colliding with the wall surface. An increased number of nozzle layers enhances the droplet evaporation rate and the average temperature in the flue; by estimation, the average temperature in the flue with three nozzle layers is 10.7 K higher than that for two nozzle layers, and 15.8 K higher than that for one nozzle layer. In the condition of higher temperature and smaller diameter, droplets evaporate more rapidly. These research results can provide a reliable reference for engineering practice.Keywords
This publication has 26 references indexed in Scilit:
- Modeling of Micro- and Nanoparticle Characteristics in DC Suspension Plasma SprayJournal of Thermal Spray Technology, 2014
- Numerical simulation and field test study of desulfurization wastewater evaporation treatment through flue gasWater Science & Technology, 2014
- Adsorption of Cd(II) on Waste Calcite Produced by the Carbonation of Flue Gas Desulfurization (FGD) GypsumMATERIALS TRANSACTIONS, 2011
- New Engineered Particles from Spray Dryers: Research Needs in Spray DryingDrying Technology, 2007
- Advanced models of fuel droplet heating and evaporationProgress in Energy and Combustion Science, 2006
- Flue gas desulphurization by spray dry absorptionChemical Engineering and Processing - Process Intensification, 2000
- Experimental Study on Self-Desulfurization Characteristics of Biobriquette in CombustionEnergy & Fuels, 1998
- Droplet vaporization model for spray combustion calculationsInternational Journal of Heat and Mass Transfer, 1989
- Modeling the Spray Absorption Process for S02RemovalJournal of the Air Pollution Control Association, 1979
- Drag coefficient and relative velocity in bubbly, droplet or particulate flowsAIChE Journal, 1979