3D Printing of Complex‐type SiOC Ceramics Derived From Liquid Photosensitive Resin
- 17 June 2019
- journal article
- research article
- Published by Wiley in ChemistrySelect
- Vol. 4 (23) , 6862-6869
Abstract
SiOC ceramics have been successfully synthesized using photosensitive resin as a liquid precursor through digital light processing 3D printing technology and pyrolysis. Liquid photosensitive resin has excellent fluidity (processable viscosity 0.068 Pa⋅s) which is beneficial for 3D printing. The liquid resin formulation was designed without solvent and filler. After researching the ratio of raw materials and temperature conditions, SiOC ceramic materials with complex structures can be produced without cracks. SiOC ceramics were characterized by SEM, XRD, Raman spectrometry and FT‐IR. The as‐prepared SiOC ceramic has excellent hardness (1.85 GPa) and high thermal conductivity (1.431 W/mK).Keywords
Funding Information
- Shenyang Science and Technology Plan Project (F17-231-1-05)
- National Natural Science Foundation of Liaoning province (201602347)
This publication has 42 references indexed in Scilit:
- Preparation and characterisation of SiOC ceramics made from a preceramic polymer and rice branJournal of the European Ceramic Society, 2013
- SiOC ceramics with ordered porosity by 3D-printing of a preceramic polymerJournal of Materials Research, 2013
- Graded Cellular Ceramics from Continuous Foam ExtrusionAdvanced Engineering Materials, 2012
- White Si–O–C(–H) Particles with Photoluminescence Synthesized by Decarbonization Reaction on Polymer Precursor in a Hydrogen AtmosphereBulletin of the Chemical Society of Japan, 2012
- Correlation Between Intrinsic Microstructure and Piezoresistivity in a SiOC Polymer‐Derived CeramicJournal of the American Ceramic Society, 2011
- Direct precision manufacturing of three-dimensional components using organically modified ceramicsCIRP Annals, 2011
- Synthesis and Characterization of Silica/Carbon Composite AerogelsJournal of the American Ceramic Society, 2010
- Piezoresistive Effect in SiOC Ceramics for Integrated Pressure SensorsJournal of the American Ceramic Society, 2010
- Synthesis and characterization by FTIR spectroscopy of silica aerogels prepared using several Si(OR)4 and R′′Si(OR′)3 precursorsJournal of Molecular Structure, 2009
- Active‐Filler‐Controlled Pyrolysis of Preceramic PolymersJournal of the American Ceramic Society, 1995