Permanent Deformation Monitoring and Remaining Life Prediction of Asphalt Pavement Combining Full-Scale Accelerated Pavement Testing and FEM
Open Access
- 8 June 2023
- journal article
- research article
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2023, 1-19
Abstract
Permanent deformation (rutting) is one of the typical failure modes of asphalt pavement with a semirigid base in high-temperature areas. To address issues of pavement structure deformation and remaining life prediction, a method of combining accelerated pavement testing and finite element (FE) simulation was proposed. A modified Burgers model considering creep parameter damage was obtained using strain monitoring data and laboratory test values, which was performed in the FE model to analyze rutting development. The results showed that high temperature and heavy axle loads greatly influenced rutting development: the tested road was loaded 360,000 times at high temperature, contributing 50 to accumulated rutting; rutting increased by 90.7 under the condition of 50 overload under high-temperature seasons from the simulated results. Then, the ratio of the bulge area to the depression area (KR) was proposed to define the rutting deformation mechanism. The KR analysis results illustrated that rutting development was a transition process from compaction rutting to flow rutting. Finally, the relationship between the action times of axle load in the tested and in-service roads was established based on the rutting equivalence principle. When the action times of axle load reach approximately 25 million times (insufficient remaining life) for the investigated Hu-Ning highway, necessary maintenance measures should be taken to treat rutting deformation.Keywords
Funding Information
- Scientific Research Foundation of the Graduate School of Southeast University (YBPY2164)
This publication has 48 references indexed in Scilit:
- Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrumConstruction and Building Materials, 2016
- Development and calibration of shear-based rutting model for asphalt concrete layersInternational Journal of Pavement Engineering, 2016
- Mechanical performance of pavement structures with paving slabs – Part I: Full-scale accelerated tests as validation for a numerical simulation toolEngineering Structures, 2015
- Mechanical performance of pavement structures with paving slabs – Part II: Numerical simulation tool validated by means of full-scale accelerated testsEngineering Structures, 2015
- Development of a rutting prediction model for asphalt pavements with the use of an accelerated loading facilityRoad Materials and Pavement Design, 2015
- Development of regression equations for local calibration of rutting and IRI as predicted by the MEPDG models for flexible pavements using Ontario's long-term PMS dataInternational Journal of Pavement Engineering, 2014
- Optical fiber-based sensors with flexible encapsulation for pavement behavior monitoringStructural Control and Health Monitoring, 2014
- Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF)Construction and Building Materials, 2013
- Local Calibration of Mechanistic–Empirical Pavement Design Guide Rutting ModelTransportation Research Record: Journal of the Transportation Research Board, 2010
- Development of a Pavement Rutting Model from Experimental DataJournal of Transportation Engineering, 2000