Evaluation of the strain-based partitioning method for mixed-mode I+II fracture of bi-material cracks
Open Access
- 26 September 2021
- journal article
- research article
- Published by Taylor & Francis in The Journal of Adhesion
- Vol. 98 (6) , 577-605
Abstract
The goal of this paper is to evaluate the strain-based partitioning method (SBM), an analytical method based on beam analysis, for the mixed-mode fracture characterization of asymmetric cracks. The fracture energy is calculated at the crack tip of mixed-mode bending (MMB) test with asymmetric geometry and asymmetric material parameters. The fracture energy obtained using SBM is benchmarked against the widely applied Williams’ partitioning method (WM) and numerical results from finite element models using the virtual crack closure technique (VCCT). Results show that WM produces inaccurate fracture modes in asymmetric conditions. However, if using SBM, the fracture mode ratio of bi-material cracks was obtained with accuracy. SBM describes a coupling function between mode I and mode II fracture that allows the mode partitioning as long the specimen complies with a simple design criterion based on the longitudinal strain equivalence between arms. Experimental results of composite-to-metal bonded joints validate the results of the parametric study. SBM proves to be an easy and reliable solution for the mixed-mode fracture characterization of bi-material cracks.Keywords
Funding Information
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro
- COST (European Cooperation in Science and Technology
- Fundacao Carlos Chagas Filho de Amparo ? Pesquisa do Estado do Rio de Janeiro
- COST European Cooperation in Science and Technology (CA18120)
- Stichting voor de Technische Wetenschappen (14366)
This publication has 44 references indexed in Scilit:
- Experimental assessment of mixed-mode partition theoriesComposite Structures, 2012
- Mixed-mode (I+II) fracture characterization of wood bonded jointsConstruction and Building Materials, 2011
- Numerical analysis of the MMB test for mixed-mode I/II wood fractureComposites Science and Technology, 2007
- Over-leg Bending Test for Mixed-mode I/II Interlaminar Fracture in Composite LaminatesInternational Journal of Damage Mechanics, 2007
- Use of FRP composites in civil structural applicationsConstruction and Building Materials, 2003
- Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminatesComposites Science and Technology, 2003
- Corrections for mode II fracture toughness specimens of composites materialsComposites Science and Technology, 1992
- Mixed-mode bending method for delamination testingAIAA Journal, 1990
- End corrections for orthotropic DCB specimensComposites Science and Technology, 1989
- Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy1985