An evaluation of machine operator exposure to occupational noise during harvesting and extraction operations in Brazilian eucalyptus plantations
- 6 June 2022
- journal article
- research article
- Published by Taylor & Francis in International Journal of Forest Engineering
- Vol. 34 (1) , 35-41
Abstract
Wood harvesting operations involve mechanized and semi-mechanized machines that expose operators to occupational noise. It was verified that the emission of occupational noise levels in the harvest of mechanized and semi-mechanized wood in Brazilian forests planted with eucalyptus were in compliance with Directive 2003/10/EC. Noise data were collected using two personal-use integrative meters. The lower action level of 80 dB(A), the upper action level of 85 dB(A) and the exposure limit of 87 dB(A) were evaluated. The results showed that 16.6% of the operators were exposed to thresholds above the lower action level, but remained below the upper level of 85 dB(A), 8.3% of the operators were exposed to occupational noise levels above the upper action level, without exceeding the exposure limit of 87 dB(A) and 25% of operators were exposed to levels above the exposure limit. Therefore, the occupational noise levels achieved when harvesting mechanized and semi-mechanized wood in forests planted with eucalyptus do not comply with Directive 2003/10/EC.Keywords
Funding Information
- CAPES (Finance Code 001)
This publication has 33 references indexed in Scilit:
- Prevention of “simple accidents at work” with major consequencesSafety Science, 2016
- Effect of noise emitted by forestry equipment on workers' hearing capacityInternational Journal of Industrial Ergonomics, 2015
- Performance of an electronic control system for hydraulically driven forestry tandem trailersBiosystems Engineering, 2015
- Dose - response relationship between noise exposure and the risk of occupational injuryNoise and Health, 2015
- Perspectives of the forest workers in GreeceiForest - Biogeosciences and Forestry, 2010
- Six-degree-of-freedom whole-body vibration exposure levels during routine skidder operationsErgonomics, 2010
- Geração de padrões ótimos de corte através de algoritmos de traçamento aplicados a fustes individuaisRevista Árvore, 2004
- On the Kolmogorov-Smirnov Test for the Exponential Distribution with Mean UnknownJournal of the American Statistical Association, 1969
- Multiple Comparisons Using Rank SumsTechnometrics, 1964
- Use of Ranks in One-Criterion Variance AnalysisJournal of the American Statistical Association, 1952