Electroless Nickel Ternary Alloy Deposition on SiO[sub 2] for Application to Diffusion Barrier Layer in Copper Interconnect Technology
Authors:
- Tetsuya OsakaTOTetsuya Osaka
- Tetsuya KurokawaTKTetsuya Kurokawa
- Tomomi KanekoTKTomomi Kaneko
- Kazuyoshi UenoKUKazuyoshi Ueno
- 1 January 2002
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 149 (11) , C573-B529
Abstract
The performance of electrochemical devices, namely, the potentiostat, has increased considerably lately, and some commercial devices determine impedance on the order of teraohms (1012 Ω).(1012 Ω). At the same time, the protective effectiveness of paint films has also improved markedly, and the paint films exhibit capacitance behavior only in the millihertz range. Up to now, electrochemical impedance spectroscopy (EIS) spectra of polymer-coated specimens were interpreted with a mechanism involving only the film resistance due to flaws through the polymer layer and the film capacitance. However, since almost no flaw should be present at huge impedance, a new insight in the modeling of EIS data for polymer coated metal electrode is needed. Therefore, the concept of dipolar relaxation developed in polymer science is introduced to interpret EIS data. To compare the dipolar relaxation and the electrode impedance, the Cole-Cole capacitance determined straightforwardly from impedance spectra was found to be a very powerful tool. It is shown that the water uptake of a paint film could be evaluated from the Cole-Cole capacitance at infinite frequency C(∞),C(∞), because the plasticizing effect induced by absorbed water in lower frequencies may lead to an overestimation of water uptake. © 2002 The Electrochemical Society. All rights reserved.Keywords
This publication has 16 references indexed in Scilit:
- Fabrication of Electroless NiReP Barrier Layer on SiO[sub 2] Without Sputtered Seed LayerElectrochemical and Solid-State Letters, 2002
- Electrochemically deposited thin film alloys for ULSI and MEMS applicationsMicroelectronic Engineering, 2000
- Integrated electroless metallization for ULSIElectrochimica Acta, 1999
- Channel‐Constrained Electroless Metal Deposition on Ligating Self‐Assembled Film SurfacesJournal of the Electrochemical Society, 1999
- High aspect ratio quarter-micron electroless copper integrated technologyMicroelectronic Engineering, 1997
- Size‐Controlled Colloidal Pd(II) Catalysts for Electroless Ni Deposition in Nanolithography ApplicationsJournal of the Electrochemical Society, 1997
- The Morphology of Electroless Ni Deposition on a Colloidal Pd(II) CatalystJournal of the Electrochemical Society, 1995
- Top-Surface Imaging Using Selective Electroless Metallization of Patterned Monolayer Films1993
- Effect of Heat‐Treatment on the Structure and Resistivity of Electroless Ni‐W‐P Alloy FilmsJournal of the Electrochemical Society, 1988
- Behavior of Pd/Sn and Pd Catalysts for Electroless Plating on Different Substrates Investigated by Means of Rutherford Backscattering SpectroscopyJournal of the Electrochemical Society, 1983