In vitro corrosion behaviour of Mg alloys in a phosphate buffered solution for bone implant application
Authors:
- 1 August 2007
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science: Materials in Medicine
- Vol. 19 (3) , 1017-1025
Abstract
The corrosion behaviour of Mg–Mn and Mg–Mn–Zn magnesium alloy in a phosphate buffered simulated body fluid (SBF) has been investigated by electrochemical testing and weight loss experiment for bone implant application. Long passivation stage and noble breakdown potential in the polarization curves indicated that a passive layer could be rapidly formed on the surface of magnesium alloy in the phosphate buffered SBF, which in turn can protect magnesium from fast corrosion. Surfaces of the immersed magnesium alloy were characterized by SEM, EDS, SAXS and XPS. Results have shown that Mg–Mn and Mg–Mn–Zn alloy were covered completely by an amorphous Mg-containing phosphate reaction layer after 24 h immersion. The corrosion behaviour of magnesium alloys can be described by the dissolving of magnesium through the reaction between magnesium and solution and the precipitating of Mg-containing phosphate on the magnesium surface. Weight loss rate and weight gain rate results have indicated that magnesium alloys were corroded seriously at the first 48 h while Mg-containing phosphate precipitated fast on the surface of magnesium alloy. After 48–96 h immersion, the corrosion reaction and the precipitation reaction reach a stable stage, displaying that the phosphate layer on magnesium surface, especially Zn-containing phosphate layer could provide effective protection for magnesium alloy.Keywords
This publication has 12 references indexed in Scilit:
- In vitro and in vivo corrosion measurements of magnesium alloysBiomaterials, 2006
- In vivo corrosion of four magnesium alloys and the associated bone responseBiomaterials, 2005
- Accumulation of aluminium in lamellar bone after implantation of titanium plates, Ti–6Al–4V screws, hydroxyapatite granulesBiomaterials, 2004
- Corrosion resistance of aged die cast magnesium alloy AZ91DMaterials Science and Engineering: A, 2004
- Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?Heart, 2003
- Conversion-coating treatment for magnesium alloys by a permanganate–phosphate solutionMaterials Chemistry and Physics, 2003
- Behavior of Magnesium in Hank's Solution Aimed to Trabecular Pattern of Natural BoneMaterials Science Forum, 2003
- Corrosion rate of magnesium and its alloys in buffered chloride solutionsCorrosion Science, 2002
- Surface Reaction of Magnesium in Hank's SolutionsMaterials Science Forum, 2000
- ABSORBABLE METAL IN BONE SURGERYJAMA, 1938