Modified repeated load tri-axial test for the high-temperature performance evaluation of HMA
Authors:
- 26 May 2015
- journal article
- research article
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 16 (4) , 784-798
Abstract
A modified repeated load tri-axial (RLT) test, capable of simulating the lateral confinement and temperature gradient in real pavement, was developed to evaluate the high-temperature performance of asphalt mixture. Proper indenter size was determined to apply partial pressure to the specimen to produce varying lateral confining pressure. To generate temperature gradient of field pavement within the specimen, the side and bottom areas of the specimen were covered with thermal isolating materials so that only the surface transfers heat with the environment. This study then fabricated a three-layer mix as the specimen to examine the effectiveness of the modified RLT test. Testing elements include surface, middle and bottom mix types, binder types, temperatures as well as their interactive impacts. The flow number index, defined as strain/load cycle, is found to be able to differentiate the impacts of all the factors except for the surface layer mix. The developed test can readily utilise the current RLT test apparatus with minor modifications and better characterise the high-temperature performance of asphalt mix at the expense of additional specimen preparation work.Keywords
Funding Information
- National Science Foundation of China (51408114)
This publication has 19 references indexed in Scilit:
- Cyclic triaxial tests on bituminous mixturesRoad Materials and Pavement Design, 2014
- Comparing Results between the Repeated Load Triaxial Test and Accelerated Pavement Test on Unbound AggregateJournal of Materials in Civil Engineering, 2014
- Rutting and moisture damage resistance of high reclaimed asphalt pavement warm mixed asphalt: loaded wheel tracking vs. conventional methodsRoad Materials and Pavement Design, 2013
- Evaluation of permanent deformation models for unbound granular materials using accelerated pavement testsRoad Materials and Pavement Design, 2013
- The use of a multi-set-up, reduced-scale accelerated trafficking simulator for evaluating roadway systems and productsInternational Journal of Pavement Engineering, 2012
- French wheel tracking round robin test on a polymer modified bitumen mixtureMaterials and Structures, 2011
- Preliminary Dynamic Modulus Criteria of HMA for Field Rutting of Asphalt Pavements: Michigan’s ExperienceJournal of Transportation Engineering, 2011
- Estimation of Stress Conditions for the Flow Number Simple Performance TestTransportation Research Record: Journal of the Transportation Research Board, 2010
- Comparison Between Flat Rubber Wheeled Loaded Wheel Tester and Asphalt Pavement AnalyzerRoad Materials and Pavement Design, 2007
- Use of Georgia Loaded Wheel Tester to Evaluate Rutting of Asphalt Samples Prepared by Superpave Gyratory CompactorTransportation Research Record: Journal of the Transportation Research Board, 1996