Metastable CrMnNi steels processed by laser powder bed fusion: experimental assessment of elementary mechanisms contributing to microstructure, properties and residual stress
Authors:
Open Access
- 18 December 2022
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-12
Abstract
The complex thermal history imposed by the laser-based powder bed fusion of metals (PBF-LB/M) process is known to promote the evolution of unique microstructures. In the present study, metastable CrMnNi steels with different nickel contents and, thus, different phase stabilities are manufactured by PBF-LB/M. Results clearly reveal that an adequate choice of materials will allow to tailor mechanical properties as well as residual stress states in the as-built material to eventually redundantize any thermal post-treatment. The chemical differences lead to different phase constitutions in as-built conditions and, thus, affect microstructure evolution and elementary deformation mechanisms upon deformation, i.e., twinning and martensitic transformation. Such alloys designed for additive manufacturing (AM) highlight the possibility to tackle well-known challenges in AM such as limited damage tolerance, porosity and detrimental residual stress states without conducting any post treatments, e.g., stress relieve and hot isostatic pressing. From the perspective of robust design of AM components, indeed it seems to be a very effective approach to adapt the material to the process characteristics of AM.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (433662460, 433662460, 433662460)
- Universität Kassel
This publication has 80 references indexed in Scilit:
- Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalumActa Materialia, 2013
- The Deformation Behavior of Functionally Graded TWIP Steel under Monotonic Loading at Ambient TemperatureMaterials Research Letters, 2013
- Influence of Manganese and Nickel on the α´ Martensite Transformation Temperatures of High Alloyed Cr‐Mn‐Ni SteelsSteel Research International, 2011
- Stacking faults in high-alloyed metastable austenitic cast steel observed by electron channelling contrast imagingScripta Materialia, 2011
- Temperature Depending Influence of the Martensite Formation on the Mechanical Properties of High‐Alloyed Cr‐Mn‐Ni As‐Cast SteelsSteel Research International, 2010
- The effect of grain size and grain orientation on deformation twinning in a Fe–22wt.% Mn–0.6wt.% C TWIP steelMaterials Science and Engineering: A, 2010
- Effects of temperature and strain rate on the tensile properties of twip steelsMatéria (Rio de Janeiro), 2010
- Deformation twinning in high-nitrogen austenitic stainless steelActa Materialia, 2007
- Effect of residual stresses on individual phase mechanical properties of austeno-ferritic duplex stainless steelActa Materialia, 2006
- The influence of phase transformations on residual stresses induced by the welding process—3D and 2D numerical modelsModelling and Simulation in Materials Science and Engineering, 2006