Effect of Permittivity and Permeability of a Flexible Magnetic Composite Material on the Performance and Miniaturization Capability of Planar Antennas for RFID and Wearable Wireless Applications
Authors:
- Lara J. MartinLMLara J. Martin
- Sooliam OoiSOSooliam Ooi
- Daniela StaiculescuDSDaniela Staiculescu
- Michael D. HillMHMichael D. Hill
- C. P. WongCWC. P. Wong
- Manos M. TentzerisMTManos M. Tentzeris
- 24 November 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components and Packaging Technologies
- Vol. 32 (4) , 849-858
Abstract
This paper is an investigation of the feasibility of applying a mechanically flexible magnetic composite material to radio frequency identification (RFID) planar antennas operating in the lower ultrahigh-frequency (UHF) spectrum (~300500 MHz). A key challenge is that the magnetic loss introduced by the magnetic composite must be sufficiently low for successful application at the targeted operating frequency. A flexible magnetic composite comprised of particles of Z-phase Co hexaferrite, also known as Co2Z, in a silicone matrix was developed. To the authors' knowledge, this is the first flexible magnetic composite demonstrated to work at these frequencies. The benchmarking structure was a quarter-wavelength microstrip patch antenna. Antennas on the developed magnetic composite and pure silicone substrates were electromagnetically modeled in Ansoft High-Frequency Sounder System full wave electromagnetic software. A prototype of the antenna on the magnetic composite was fabricated, and good agreement between the simulated and measured results was found. Comparison of the antennas on the magnetic composite versus the pure silicone substrate showed miniaturization capability of 2.4 times and performance differences of increased bandwidth and reduced gain, both of which were attributed in part to the increase in the dielectric and magnetic losses. A key finding of this paper is that a small amount of permeability (mur~2.5) can provide a substantial capability for miniaturization, while sufficiently low-magnetic loss can be introduced for successful application at the targeted operating frequency. This magnetic composite shows the capability to fulfill this balance and to be a feasible option for RFID, flexible wearable, and conformal applications in the lower UHF spectrum.Keywords
This publication has 9 references indexed in Scilit:
- A novel hybrid electrical/mechanical optimization technique using time‐domain modeling, finite element method and statistical tools for co‐design and optimization of RF‐integrated mechanical structuresInternational Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 2007
- Performance Capability Modeling And Optimization Of RF/Millimeter Wave Integrated Functions And Modules Using A Hybrid Statistical/Electromagnetic Technique That Includes Process Variations2006
- Handling Asymmetry in Gain in Directional Antenna Equipped Ad Hoc Networks2006
- Embedded magnetics for integrated power2004
- Broadband microstrip array antennas2002
- New, high frequency transformer topologies2002
- Magneto optical technique for beam steering by ferrite based patch arraysIEEE Transactions on Antennas and Propagation, 2001
- Tuning procedure in microstrip antennas on ferrite substrate1997
- Rectangular microstrip antenna on a ferrite substrateIEEE Transactions on Antennas and Propagation, 1982