Alteration of Wettability of Corroding Carbon Steel Surface by Carbon Dioxide Corrosion Inhibitors— Effect on Carbon Dioxide Corrosion Rate and Contact Angle
Authors:
- 1 December 2008
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 64 (12) , 905-919
Abstract
The wettability of the steel surface is an important factor co-determining the risk of corrosion in multiphase pipelines for transportation of oil and gas. The effect of carbon dioxide (CO2) corrosion inhibitors on the wettability of carbon steel was investigated in the present paper. Also investigated was the effect of oil on the performance of these inhibitors. Three inhibitors were investigated. Two of them were commercial inhibitor-based chemicals: an oleic imidazoline salt (OI) and a phosphate ester (PE). The third was cetyltrimethylammonium bromide (CTAB), a well-characterized quaternary ammonium compound. A refined, low-aromatic oil product was used in the tests. The wettability of the corroding carbon steel surface was studied by contact angle measurements (25°C, 1 bar CO2, 3 wt% sodium chloride [NaCl]). Both oil-in-water and water-in-oil experiments were performed. The effect of the inhibitor/oil interactions were also studied in CO2 corrosion tests where the steel specimens were alternately exposed to oil and the aqueous phase. The performance of OI and PE was significantly improved by the presence of oil. These inhibitors also enhanced the oil wettability of the steel surface, while CTAB enhanced the water wettability.Keywords
This publication has 26 references indexed in Scilit:
- The effect of additives on the treatment of oil-in-water emulsions by vacuum evaporationJournal of Hazardous Materials, 2007
- Langmuir–Blodgett films of dococyltriethylammonium bromide and octadecanol on iron. Deposition and corrosion inhibitor performance in CO2 containing brineCorrosion Science, 2006
- A quartz crystal microbalance study of the adsorption of quaternary ammonium derivates on iron and cementiteColloids and Surfaces A: Physicochemical and Engineering Aspects, 2004
- Mechanism of cationic surfactant adsorption at the solid–aqueous interfaceAdvances in Colloid and Interface Science, 2003
- The effect of crude oil acid fractions on wettability as studied by interfacial tension and contact anglesJournal of Petroleum Science and Engineering, 2001
- Adsorption/aggregation of surfactants and their mixtures at solid–liquid interfacesAdvances in Colloid and Interface Science, 2000
- Electrochemical impedance and X-ray photoelectron spectroscopic studies of the inhibition of mild steel corrosion in acids by cyclohexylamineElectrochimica Acta, 1997
- The mechanism of action of an oleic imidazoline based corrosion inhibitor for oilfield useColloids and Surfaces, 1991
- The wettability of industrial surfaces: Contact angle measurements and thermodynamic analysisChemical Engineering and Processing - Process Intensification, 1985
- Determination of corrosion rates by electrochemical DC and AC methodsCorrosion Science, 1981