Polymer electrolyte membranes based on poly(arylene ether)s with penta-sulfonated pendent groups
- 12 November 2012
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 1 (4) , 1465-1474
Abstract
The preparation and characterization of new polymeric ionomers based on a fully aromatic poly(arylene ether) backbone with locally pentasulfonated pendent groups for applications as proton exchange membranes is reported. The high molecular weight sulfonated polymers were obtained by the polycondensation of new (2,6-difluorophenyl) (4-(1,2,3,4,5-pentaphenylbenzene)phenyl)methanone, 4,4′-difluorodiphenyl methanone, and 4,4′-dihydroxydiphenylsulfone, followed by sulfonation using sulfuric acid in high yields. The polymers produced tough, flexible, and transparent membranes by solvent casting. Membranes with ion exchange capacities between 0.8 and 1.7 mEq g-1 showed high proton conductivities and low methanol permeabilities. Compared to Nafion 117, these sulfonated membranes exhibited better microphase separation morphologies. The fully humidified membranes also exhibited considerably good mechanical properties, with tensile strengths from 35 to 45 MPa and elongations at break from 23 to 49%. This investigation demonstrates a controllable high density sulfonated side group of a poly(arylene ether sulfone) membrane with tunable and balanced properties, which is promising for proton exchange membrane fuel cell technology.Keywords
This publication has 37 references indexed in Scilit:
- Sulfonated hydrocarbon membranes for medium-temperature and low-humidity proton exchange membrane fuel cells (PEMFCs)Progress in Polymer Science, 2011
- Partly fluorinated poly(arylene ether ketone sulfone) hydrophilic–hydrophobic multiblock copolymers for fuel cell membranesInternational Journal of Hydrogen Energy, 2011
- Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challengesProgress in Polymer Science, 2011
- Densely Sulfophenylated Segmented Copoly(arylene ether sulfone) Proton Exchange MembranesMacromolecules, 2011
- Low Water Swelling and High Proton Conducting Sulfonated Poly(arylene ether) with Pendant Sulfoalkyl Groups for Proton Exchange MembranesMacromolecular Rapid Communications, 2007
- Proton‐Conducting Aromatic Polymers Carrying Hypersulfonated Side Chains for Fuel Cell ApplicationsAdvanced Functional Materials, 2007
- Solid-State NMR Study of Two Classic Proton Conducting Polymers: Nafion and Sulfonated Poly(ether ether ketone)sMacromolecules, 2006
- Transport of methanol and protons through partially sulfonated polymer blend membranes for direct methanol fuel cellJournal of Membrane Science, 2004
- Properties of SPEEK based PEMs for fuel cell applicationCatalysis Today, 2003
- On the development of proton conducting polymer membranes for hydrogen and methanol fuel cellsJournal of Membrane Science, 2001