Numerical Study of the Fuel Efficiency and the Thermal Management of a Fuel Cell Powered Long-Haul Vehicle
Authors:
- Martin BauerMBMartin Bauer
- Thomas LauerTLThomas Lauer
- 11 April 2023
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
Abstract
In the future, conventional powertrains will increasingly be supplied by sustainable energy sources. Long-haul freight transport requires efficient energy storage and the ability to refuel quickly. For this reason, hydrogen-powered PEM fuel cells are being discussed as a future energy source for long-distance vehicles. However, there are numerous challenges in packaging, system cooling and service life. Above all, the dissipation of the fuel cell’s heat losses places high demands on the design of the cooling system due to the relatively low operating temperature.In the presented study, a complete generic drive train of a long-distance commercial vehicle was set up within a suitable simulation environment to investigate the required sizes of the fuel cell stack, the HV battery, the hydrogen tanks, and the cooling circuit. The thermodynamic and electrochemical data that was necessary to describe the stack, the BoP components, the battery, the coolers, and the drivetrain components were taken from the literature or similar applications.Afterward, the requested propulsion power, fuel consumption, and cooling demand were analyzed for constant vehicle speed and representative driving cycles. Mountainous highway passages, as typically occurring in the Alpes, were investigated for different ambient temperatures. Detailed loss analyses were carried out for the whole powertrain and visualized in Sankey diagrams.The results revealed challenging thermal management at high ambient temperatures that may result in degrading fuel cell power when crawling uphill with low vehicle speed. However, the potential and suitability of PEM fuel cells for sustainable long-haul transport could be clearly demonstrated.Keywords
This publication has 14 references indexed in Scilit:
- Wasserstoff in der Fahrzeugtechnik2018
- Beitrag zur Optimierung von Wasserstoffdruckbehältern2018
- “We expect to gain a lot of knowledge from e-trucks for the future”ATZ worldwide, 2017
- Thermal Management of Electric Vehicle Battery Systems2016
- Power Electronics Applications for Fuel Cells *2016
- An experimental evaluation of the methodology proposed for the monitoring and certification of CO2 emissions from heavy-duty vehicles in EuropeEnergy, 2016
- Nutzfahrzeugtechnik2016
- Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangersInternational Journal of Refrigeration, 2002
- The Effect of Simultaneously Developing Flow on Heat Transfer in Rectangular TubesHeat Transfer Engineering, 2001
- A generalized heat transfer correlation for Iouver fin geometryInternational Journal of Heat and Mass Transfer, 1997