Impact of Welding Parameters in the Porosity of a Dissimilar Welded Lap Joint of CP800-XPF1000 Steel Weldment by GMAW-P
Authors:
- Julio Cesar Garcia-GuerreroJGJulio Cesar Garcia-Guerrero
- Francisco Fernando Curiel-LópezFrancisco Fernando Curiel-López
- Víctor Hugo López-MorelosVLVíctor Hugo López-Morelos
- Jose Jaime Taha-TijerinaJose Jaime Taha-Tijerina
- Teresita Jesus Sánchez-CruzTSTeresita Jesus Sánchez-Cruz
- Maria del Carmen Ramirez-LopezMaria del Carmen Ramirez-Lopez
- Eduardo Cortes-CarilloECEduardo Cortes-Carillo
- Miguel Angel Quinones-SalinasMQMiguel Angel Quinones-Salinas
Open Access
Abstract
The use of the orthogonal array L4 allows a determination of the effect between the welding parameters peak current (Ip), background current (Ib) and frequency (f) on the porosities in a dissimilar welded lap joint of CP800 and XPF1000 steel weldment by the gas metal arc welding process with the transfer pulsed mode. According to the results, modifications in the welding parameters affect the heat input during welding. A heat input higher than 0.30 KJ/mm generates up to 0.32% porosity in the weld metal, while a heat input lower than 0.25 KJ/mm generates up to 28% porosity in the weld metal. The variation in heat input generated by the process allowed the observation of the final microstructure of the welded joints and the effect of mechanical properties such as hardness because the results show values of hardness from 300 Hv to 400 Hv in the heat affected zone (HAZ).Keywords
This publication has 20 references indexed in Scilit:
- Optimization of welding parameters for En8D and SAE1018 materials by TaguchiInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Mechanical properties and microstructure characterization of GTAW of micro-alloyed hot rolled ferritic XPF800 steelEngineering Science and Technology, an International Journal, 2021
- Effects of welding current and torch position parameters on minimizing the weld porosity of zinc-coated steelThe International Journal of Advanced Manufacturing Technology, 2017
- Microstructural and Mechanical Evolution of a Low Carbon Steel by Friction Stir ProcessingMetallurgical and Materials Transactions A, 2017
- Advanced gas metal arc welding processesThe International Journal of Advanced Manufacturing Technology, 2012
- Welding of twinning-induced plasticity steelsScripta Materialia, 2012
- Numerical simulation of molten pool dynamics in high power disk laser weldingJournal of Materials Processing Technology, 2012
- The mechanism of acicular ferrite in weld depositsCurrent Opinion in Solid State and Materials Science, 2004
- Welding: Solidification and microstructureJOM, 2003
- Influence of Widmanstätten ferrite on mechanical properties of microalloyed steelsMetals Technology, 1980