Modelling, simulation, and experimental verification of the kinematics and dynamics of a double wishbone suspension configuration
Authors:
- 1 October 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
- Vol. 223 (10) , 1239-1262
Abstract
This paper describes the non-linear modelling of a double wishbone suspension developed to investigate the non-linear kinematics and dynamics in the closed, spatial kinematic chain configuration. Analytical and ADAMS models are generated and kinematic and dynamic characteristics of the models are investigated. The analytical model of the suspension mechanism is an idealized four degree-of-freedom (DOF) model, with suspension members considered as rigid links and bushings taken as linear spring—damper elements. The simulation results of the model subjected to a virtual kinematics and compliance (K&C) test are compared with results generated by an ADAMS model, developed based on parameters obtained from the vehicle manufacturer, subjected to the same virtual test. The experimental K&C testing on the test vehicle presents a method of capturing the kinematic characteristics of the suspension mechanism. The comparison of the simulation and experimental results presented shows that the models are capable of simulating the characteristics of the pre-existing suspension configuration of the test vehicle.Keywords
This publication has 8 references indexed in Scilit:
- Analytical modelling and experimental verification of tyre non-uniformityInternational Journal of Vehicle Design, 2008
- Experimental Testing and Validation of Tangential Steering Wheel Vibrations Due to Tire Nonuniformity2005
- Nonlinear Modeling and Theoretical Development of Tire Nonuniformity Induced Tangential Steering Wheel Vibrations2005
- Development of a Non-Linear Model of a Double Wishbone Suspension for the Characterization of Force Transmission to the Steering Column and Chassis2004
- Dynamic modelling of the double wishbone motor-vehicle suspension systemEuropean Journal of Mechanics - A/Solids, 2002
- Research on the Dynamics of Flexible Multibody System of Passenger Car SuspensionSAE International Journal of Advances and Current Practices in Mobility, 1998
- Longitudinal Suspension Compliance Modeling with ADAMSSAE International Journal of Advances and Current Practices in Mobility, 1993
- Non-Linear Model Formulation for the Static and Dynamic Analyses of Front SuspensionsSAE International Journal of Advances and Current Practices in Mobility, 1977