An extended gate field-effect transistor (EG-FET) type non-enzymatic glucose sensor with inkjet-printed copper oxide nanoparticles

Authors:
Open Access
Publisher website
Google Scholar
Abstract
We develop a disposable and cost-effective non-enzymatic glucose sensor consisting of an extended gate field effect transistor (EG-FET) to obtain effortless operation. The sensor is fabricated by printing, gold (Au) precursor ink and copper oxide nanoparticles (CuO NPs) inks using a commercial inkjet printer on a flexible Polyimide (PI) substrate. First, sensing properties are tested electrochemically. The sensor shows a sensitivity of 728.5 μA cm−2 mM−1 and a detection limit of 0.01 mM with a correlation coefficient (R) of 0.998. The observed linear dynamic range is from 0.5 to 7 mM. After that, the sensing electrode is adapted to the EG-FET. Two linear response ranges extend from 0.1 to 4 mM of a low concentration range of glucose with a sensitivity of 1295 μA cm−2 mM−1, and from 5 to 30 mM of a high concentration range of glucose with a sensitivity of 164 μA cm−2 mM−1 are observed. The EG-FET approach can enhance the detection sensitivities using amplification for a low concentration glucose range and extending a detection range for high concentration glucose. The presented work demonstrates that simply printed CuO NPs sensors can be used at low cost for disposable wide-range glucose detection devices. Article Highlights: A non-enzymatic printed glucose sensor using an inkjet printer has been successfully developed. CuO nanoparticles ink is printed on thin gold electrodes on Polyimide film. We evaluate the glucose detection of extended-gate field-effect transistor (EG-FET) sensors. The sensitivity is estimated to be 1295 μA cm−2 mM−1. The EG-FET structure has the merit of a simple operation and cost-effective personal health care devices.

This publication has 46 references indexed in Scilit: