Research on component compatibility and aging behavior of chemically toughened high-performance asphalt
Authors:
Open Access
- 17 July 2025
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Built Environment
- Vol. 11, 1638263
Abstract
Introduction: Frequent cracks, potholes, and other defects, as well as a decline in the durability of asphalt pavements, are specific manifestations of the deterioration of road performance caused by asphalt aging. The compatibility between different oil-source asphalts and green high-viscosity modifiers critically determines the performance and aging resistance of modified asphalt materials.Methods: This study systematically investigated three representative oilsource asphalts (noted as BA-A, BA-B, BA-C) combined with a novel green high-viscosity modifier to prepare chemically toughened high-performance asphalts (noted as HP-A, HP-B, HP-C). The research employed comprehensive analytical methods, including physical property characterization, dynamic shear rheometry, Fourier transform infrared spectroscopy, and gel permeation chromatography, to evaluate compatibility mechanisms and aging behavior under both short-term aging (using thin-film oven test) and long-term (using pressure aging vessel) aging conditions.Results: The green highviscosity modifier exhibits optimal compatibility with BA-C asphalt, displaying elevated softening point and Brookfield viscosity with superior resistance to shear deformation, making it particularly suitable for high-temperature applications in high-temperature regions and heavy-duty traffic pavements. Under short-term aging condition, HP-A asphalt has the minimal softening point increment of 0.4°C, while HP-C asphalt has the lowest viscosity aging index of 2.6%. Under long-term aging, HP-C asphalt has the lowest softening point increment and viscosity aging index of 4.2°C and 6.1%, respectively, indicating good long-term aging resistance. Molecular analysis reveals that SBS modified asphalt and HP-B asphalt show increased molecular weight distribution ratios due to oxidative crosslinking, whereas HP-A and HP-C asphalts show decreased ratios due to chain segment fracture. HP-B asphalt has the highest sulfoxide aging index increase due to elevated sulfur content, while HP-C asphalt shows superior antioxidant properties with lower carbonyl and sulfoxide aging indices, 43.2% and 36.6%, respectively, attributed to its high aromatic content. And proposed using two crack characteristic parameters, fractal dimension and crack rate, to describe the extension characteristics of cracks. The results indicate that the road surface is more prone to cracking in negative zero temperature environments, with the number and rate of cracks generated at −15°C being much higher than the other three low-temperature environments. Compared to the 15°C environment, the crack rate increased by 18.26%.Discussion: It has been confirmed that BA-C asphalt has excellent compatibility with green high-viscosity modifiers, which are ideal for use in high-temperature regions and heavy-duty traffic pavements, offering significant improvements in pavement high-temperature stability and long-term durability.Keywords
This publication has 32 references indexed in Scilit:
- Evaluation of properties and aging resistance of epoxy asphalt composite modified by ultraviolet absorberJournal of Applied Polymer Science, 2023
- Bitumen and asphalt concrete modified by nanometer-sized particles: Basic concepts, the state of the art and future perspectives of the nanoscale approachAdvances in Colloid and Interface Science, 2020
- Study on the effect of hydrated lime content and fineness on asphalt propertiesConstruction and Building Materials, 2020
- Effect of multi-scale nanocomposites on performance of asphalt binder and mixtureConstruction and Building Materials, 2020
- Study on improvement of asphalt adhesion by hydrated lime based on surface free energy methodConstruction and Building Materials, 2019
- Influence of layered silicate types on physical, rheological and aging properties of SBS modified asphalt with multi-dimensional nanomaterialsConstruction and Building Materials, 2019
- Rheological and anti-aging performance of SBS modified asphalt binders with different multi-dimensional nanomaterialsConstruction and Building Materials, 2018
- Investigation of the aging behaviors of multi-dimensional nanomaterials modified different bitumens by Fourier transform infrared spectroscopyConstruction and Building Materials, 2018
- A review on low temperature performances of rubberized asphalt materialsConstruction and Building Materials, 2017
- Evaluation of low-temperature performance of asphalt paving mixturesCold Regions Science and Technology, 2012