Electrical Characteristics of the Contour-Vibration-Mode Piezoelectric Transformer with Ring/Dot Electrode Area Ratio
Authors:
- Juhyun YooJYJuhyun Yoo
- Kwanghee YoonKYKwanghee Yoon
- Yongwoo LeeYLYongwoo Lee
- Sungjae SuhSSSungjae Suh
- Jongsun KimJKJongsun Kim
- Chungsik YooCYChungsik Yoo
- 1 May 2000
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 39 (5R) , 2680-2684
Abstract
Contour-vibration-mode Pb(Sb1/2Nb1/2)O3–Pb(Zr, Ti)O3 [PSN–PZT] piezoelectric transformers with different ring/dot electrode area ratios were fabricated to the size of 27.5×27.5×2.5 mm3 by cold isostatic pressing. The electrical properties and characteristic temperature rises caused by the vibration were measured at various load resistances. Efficiencies above 90% with load resistance were obtained from all the transformers. The voltage step-up ratio appeared to be proportional to the dot electrode area. A 14 W fluorescent lamp, T5, was successfully driven by all of the fabricated transformers. The transformer with ring/dot electrode area ratio of 4.85 exhibited the best properties in terms of output power, efficiency and characteristic temperature rise, 14.88 W, 98% and 5°C, respectively.Keywords
This publication has 3 references indexed in Scilit:
- Piezoelectric Transformer for Cold Cathode Fluorescent Lamp InverterJapanese Journal of Applied Physics, 1997
- High Power Transformer Employing Piezoelectric CeramicsJapanese Journal of Applied Physics, 1996
- Piezoelectric Ceramic Transformer Using Piezoelectric Lateral Effect on Input and on OutputJapanese Journal of Applied Physics, 1996