High-Throughput Manufacture of 3D Fiber Scaffolds for Regenerative Medicine
Authors:
Open Access
- 1 July 2020
- journal article
- research article
- Published by SAGE Publications in Tissue Engineering Part C: Methods
- Vol. 26 (7) , 364-374
Abstract
Engineered scaffolds used to regenerate mammalian tissues should recapitulate the underlying fibrous architecture of native tissue to achieve comparable function. Current fibrous scaffold fabrication processes, such as electrospinning and three-dimensional (3D) printing, possess application-specific advantages, but they are limited either by achievable fiber sizes and pore resolution, processing efficiency, or architectural control in three dimensions. As such, a gap exists in efficiently producing clinically relevant, anatomically sized scaffolds comprising fibers in the 1–100 μm range that are highly organized. This study introduces a new high-throughput, additive fibrous scaffold fabrication process, designated in this study as 3D melt blowing (3DMB). The 3DMB system described in this study is modified from larger nonwovens manufacturing machinery to accommodate the lower volume, high-cost polymers used for tissue engineering and implantable biomedical devices and has a fiber collection component that uses adaptable robotics to create scaffolds with predetermined geometries. The fundamental process principles, system design, and key parameters are described, and two examples of the capabilities to create scaffolds for biomedical engineering applications are demonstrated. Impact statement: Three-dimensional melt blowing (3DMB) is a new, high-throughput, additive manufacturing process to produce scaffolds composed of highly organized fibers in the anatomically relevant 1–100 μm range. Unlike conventional melt-blowing systems, the 3DMB process is configured for efficient use with the relatively expensive polymers necessary for biomedical applications, decreasing the required amounts of material for processing while achieving high throughputs compared with 3D printing or electrospinning. The 3DMB is demonstrated to make scaffolds composed of multiple fiber materials and organized into complex shapes, including those typical of human body parts.Keywords
This publication has 39 references indexed in Scilit:
- Meltblowing: Multiple polymer jets and fiber-size distribution and lay-down patternsPolymer, 2011
- The extracellular matrix at a glanceJournal of Cell Science, 2010
- Phase separation, pore structure, and properties of nanofibrous gelatin scaffoldsBiomaterials, 2009
- Needleless electrospinning. I. A comparison of cylinder and disk nozzlesJournal of Applied Polymer Science, 2009
- Engineering on the Straight and Narrow: The Mechanics of Nanofibrous Assemblies for Fiber-Reinforced Tissue RegenerationTissue Engineering Part B: Reviews, 2009
- Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineeringBiomaterials, 2008
- Characterization of emulsified chitosan–PLGA matrices formed using controlled‐rate freezing and lyophilization techniqueJournal of Biomedical Materials Research Part A, 2006
- Electrospinning process and applications of electrospun fibersJournal of Electrostatics, 1995
- Melt blowing: General equation development and experimental verificationAIChE Journal, 1990
- A macroscopic view of the melt-blowing process for producing microfibersIndustrial & Engineering Chemistry Research, 1988