Design and Implementation of a Highly Integrated Dual Active Bridge Microconverter
- 26 October 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 31 (8) , 5635-5643
Abstract
This paper deals with the design and the implementation of an isolated and highly integrated low voltage, low power microconverter. A dual active-bridge topology is considered as a good candidate for reducing the number of passive elements. The design of a “power die” integrating power inverter legs and their driver circuits is carried out in order to benefit from the high level of integration and to reduce the amount of active components and the volume of the converter. Thus, a microconverter is built for 10 W power supply (5 V/2 A) and is operating at 1 MHz switching frequency. The measured efficiency of the converter is 88% for 6.5 W transferred power and 86% for 8.5 W transferred power without taking into account its control unit. The converter is operating in natural convection, and no cooling system is implemented. Therefore, a power density of 9.9 kW/L is achieved, which is beyond the state of the art of the conventional isolated converters whose power densities are around 1-2 kW/L at the same power level.Keywords
Funding Information
- ANR Miconet 2 Project (ANR-2010-BLAN-0909-01)
- ANR ProCD Project (ANR-12-EMMA-0029-01)
This publication has 22 references indexed in Scilit:
- Study of Techniques for Flip-Chip Bonding to Organic Substrates for Low-Power ApplicationsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2015
- Overview of Planar Magnetic Technology—Fundamental PropertiesIEEE Transactions on Power Electronics, 2013
- High-power-density versatile DC-DC converter for environmentally friendly data centre2012
- Fully integrated isolated dc-dc converter using micro-transformersAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2008
- Basic DC-to-DC ConvertersIEEE Transactions on Power Electronics, 2008
- PWM Converter Power Density Barriers2007
- Laser assisted soldering and Flip-Chip attach for 3-D packaging2006
- Performance optimization of a high current dual active bridge with a wide operating voltage range2006
- Optimum design method of CMOS IC for DC-DC converter that integrates power stage MOSFETs2004
- Low-Voltage-Swing Monolithic dc–dc ConversionIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2004