Effects of Wood Flour (WF) Pretreatment and the Addition of a Toughening Agent on the Properties of FDM 3D-Printed WF/Poly(lactic acid) Biocomposites
Open Access
Abstract
In order to improve the properties of wood flour (WF)/poly(lactic acid) (PLA) 3D-printed composites, WF was treated with a silane coupling agent (KH550) and acetic anhydride (Ac2O), respectively. The effects of WF modification and the addition of acrylicester resin (ACR) as a toughening agent on the flowability of WF/PLA composite filament and the mechanical, thermal, dynamic mechanical thermal and water absorption properties of fused deposition modeling (FDM) 3D-printed WF/PLA specimens were investigated. The results indicated that the melt index (MI) of the specimens decreased after WF pretreatment or the addition of ACR, while the die swell ratio increased; KH550-modified WF/PLA had greater tensile strength, tensile modulus and impact strength, while Ac2O-modified WF/PLA had greater tensile modulus, flexural strength, flexural modulus and impact strength than unmodified WF/PLA; after the addition of ACR, all the strengths and moduli of WF/PLA could be improved; after WF pretreatment or the addition of ACR, the thermal decomposition temperature, storage modulus and glass transition temperature of WF/PLA were all increased, and water absorption was reduced.Keywords
Funding Information
- Natural Science Foundation of the Jiangsu Higher Education Institutions of China (19KJB430025)
This publication has 34 references indexed in Scilit:
- Enhancements in crystallinity, thermal stability, tensile modulus and strength of sisal fibres and their PP composites induced by the synergistic effects of alkali and high intensity ultrasound (HIU) treatmentsUltrasonics Sonochemistry, 2017
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA compositesComposites Part A: Applied Science and Manufacturing, 2016
- Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printingPolymer Composites, 2016
- 3D printing of wood fibre biocomposites: From mechanical to actuation functionalityMaterials & Design, 2016
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnationScientific Reports, 2016
- Polylactic acid (PLA) biocomposites reinforced with coir fibres: Evaluation of mechanical performance and multifunctional propertiesComposites Part A: Applied Science and Manufacturing, 2014
- Thermal Stability and Degradation of Poly (Lactic Acid) / Hexamoll® DINCH / Montmorillonite CompositesBioResources, 2014
- Effects of Maleic Anhydride-Grafted Polypropylene (MAPP) on the Physico-Mechanical Properties and Rheological Behavior of Bamboo Powder-Polypropylene Foamed CompositesBioResources, 2013
- Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer moldingComposites Part A: Applied Science and Manufacturing, 2009
- Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester compositesComposites Science and Technology, 2007