A 3‐D finite element model for gas‐assisted injection molding: Simulations and experiments
- 1 March 2001
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 41 (3) , 449-465
Abstract
To gain a better understanding of the gas‐assisted injection molding process, we have developed a computational model for the gas assisted injection molding (GAIM) process. This model has been set up to deal with (non‐isothermal) three‐dimensional flow, in order to correctly predict the gas distribution in GAIM products. It employs a pseudo‐concentration method, in which the governing equations are solved on a fixed grid that covers the entire mold. Both the air downstream of the polymer front and the gas are represented by a fictitious fluid that does not contributeto the pressure drop in the mold. The model has been validated against both isothermal and non‐isothermal gas injected experiments. In contrast to other models that have been reported in the literature, our model yields the gas penetration from the actual process physics (not from a presupposed gas distribution). Consequently, it is able to deal with the 3‐D character of the process, as well as with primary (end of gas filling) and secondary (end of packing) gas penetration, including temperature effects and generalized Newtonian viscosity behavior.Keywords
This publication has 15 references indexed in Scilit:
- Numerical Simulation of the Multi-Component Injection Moulding ProcessInternational Polymer Processing, 1997
- Towards a 3-D Finite Element Model for the Gas-Assisted Injection Moulding ProcessInternational Polymer Processing, 1997
- Isothermal gas‐assisted displacement of viscoplastic liquids in tubesPolymer Engineering & Science, 1995
- Unstable Gas Penetrations in Symmetrical Rib Channels During Gas-assisted Injection MoldingInternational Polymer Processing, 1995
- Development and application of CAE technology for the gas‐assisted injection molding processAdvances in Polymer Technology, 1995
- The motion of long bubbles in tubes of square cross section*Physics of Fluids A: Fluid Dynamics, 1993
- An experimental investigation of the streamlines in viscous fluid expelled from a tubeJournal of Fluid Mechanics, 1964
- On driving a viscous fluid out of a tubeJournal of Fluid Mechanics, 1962
- Deposition of a viscous fluid on the wall of a tubeJournal of Fluid Mechanics, 1961
- 119. Studies in electro-endosmosis. Part VI. The “bubble-tube” method of measurementJournal of the Chemical Society (Resumed), 1935