Effect of TiBN Content on Microstructure and Properties of Cu-Ni Gradient Coatings Prepared by Laser Cladding
Open Access
Abstract
This study introduces a Ni15 intermediate layer to address cracks and low laser absorption in laser cladding of pure copper on 45 steel, preventing thermal stress and improving bonding strength. TiBN ceramic particles are added to enhance laser absorption and improve surface strength and wear resistance. Cu-TiBN gradient coatings with varying TiBN contents (0–8 wt.%) were fabricated on 45 steel. The study examines the coatings’ morphology, microstructure, phase composition, hardness, tribological performance, and wear mechanisms. Results show that TiBN alters the coating’s structure, refining the grains. With TiBN content over 4%, the coating mainly consists of the CuNi phase, and strengthening phases like NiTi and Cu2Ti form. Hardness increases from 66HV0.1 to 270HV0.1. The Cu-TiBN gradient coating outperforms pure copper in mechanical properties and wear resistance. The coating with 2% TiBN has the lowest friction coefficient (0.637), but higher TiBN content increases brittleness and cannot play a good role in reducing friction. The study demonstrates that TiBN boosts laser efficiency and wear resistance in copper-based coatings, offering a novel approach to laser cladding.Keywords
Funding Information
- Innovative and Entrepreneurial Talent Foundation of Jiangsu Province (JSSCRC2021545)
- Yancheng Science and Technology Program Special Fund—Policy Guidance Program—International Science and Technology Cooperation Project (Ycgh003)
- Funding for School-Level Research Projects of the Yancheng Institute of Technology (XJR2023003)
This publication has 26 references indexed in Scilit:
- Study on microstructure and properties of laser cladding Cu/10Sn5Bi alternating stripe coatingMaterials Chemistry and Physics, 2025
- Role of W in W-coated Cu powder in enhancing the densification-conductivity synergy of laser powder bed fusion built Cu componentJournal of Materials Processing Technology, 2023
- Research on the effect of IN718 transition layer on the performance of laser cladding Co06 coating on RuT450Journal of Materials Science, 2023
- The enhancement of laser absorptivity and properties in laser powder bed fusion manufactured Cu-Cr-Zr alloy by employing Y2O3 coated powder as precursorJournal of Alloys and Compounds, 2022
- Preparation of (B,N)-codoped TiO2 micro-nano composite powder using TiBN powder as a precursorCeramics International, 2022
- Laser Directed Energy Deposition based Additive Manufacturing of Copper: Process Development and Material CharacterizationsJournal of Manufacturing Processes, 2020
- Development of thick copper claddings on SS316L steel for In-vessel components of fusion reactors and copper-cast iron canistersFusion Engineering and Design, 2018
- In-situ synthesized Ni–Zr intermetallic/ceramic reinforced composite coatings on zirconium substrate by high power diode laserJournal of Alloys and Compounds, 2015
- Preliminary Investigation on Brazing Performance of Ti/Ti and Ti/Steel Joints Using Copper Film Deposited by PVD TechniqueJournal of Materials Engineering and Performance, 2012
- Use of a PECVD–PVD process for the deposition of copper containing organosilicon thin films on steelApplied Surface Science, 2009