Behavior of Corroded Steel Reinforcing Bars Under Monotonic and Cyclic Loadings
Authors:
- 20 April 2011
- journal article
- research article
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 18 (3) , 218-224
Abstract
This paper investigates the monotonic and low-cycle fatigue properties of corroded steel reinforcing bars and compares their characteristics to that of un-corroded ones. Specifically, this paper investigates the effect of corrosion rate on the degradation of monotonic mechanical properties and low-cycle fatigue life of BS4449/2005 Grade B500B steel reinforcing bars. Twenty four samples of Grade B500B bars were corroded in the laboratory by immersing un-corroded steel bar samples in sealed flasks filled with a 10% concentration mixture of sulfuric and nitric acids as an accelerated corrosion substance. Three different corrosion levels were selected in this study, mainly 9–10%, 13–15%, and 19–20% measured as mass loss of un-corroded bar specimens. Monotonic tensile tests were carried out on 8 sample bars and 24 low-cycle fatigue tests were conducted at different strain amplitude mainly, ±4%, ±5% and ±6%. It is observed that the material's yield and ultimate tensile strengths and ductility, in addition to the fatigue life and the total dissipated energy of the steel bars, are reduced with increasing corrosion damage levels. Other conclusions and observations were also drawn.Keywords
This publication has 5 references indexed in Scilit:
- Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigueConstruction and Building Materials, 2007
- Tensile and low cycle fatigue behavior of corroded reinforcing steel bars S400Construction and Building Materials, 2007
- Tensile behavior of corroded reinforcing steel bars BSt 500sConstruction and Building Materials, 2006
- Effect of degree of corrosion on the properties of reinforcing steel barsConstruction and Building Materials, 2001
- Failure initiation in unnotched specimens subjected to monotonic and cyclic loadingTheoretical and Applied Fracture Mechanics, 1984