New Monomer Based on Eugenol Methacrylate, Synthesis, Polymerization and Copolymerization with Methyl Methacrylate–Characterization and Thermal Properties
Open Access
Abstract
Poly(eugenyl-2-hydroxypropyl methacrylate) (PEUGMA), poly(methyl methacrylate) (PMMA) and poly(eugenyl-2-hydroxypropyl methacrylate-co-methyl methacrylate) (PEUGMA-co-MMA) were synthesized by a free radical polymerization route in the presence of azobisisobutyronitrile. EUGMA was synthesized by etherification of the eugenol phenolic hydroxyl group with glycidyl methacrylate. Polymers and copolymers were characterized using size exclusion chromatography, Fourier transform infrared, and nuclear magnetic resonance. The effects of the encumbering substituent on the thermal behavior of the polymers and copolymers were studied by differential scanning calorimetry, thermogravimetry (TG) and direct analysis, using real-time, time-of-flight mass spectroscopy (DART-ToF-MS) methods. The results obtained revealed that for PEUGMA, the average molecular weight was 1.08 × 105, and increased slowly with the decrease in the EUGMA content in the copolymer. The order of the distribution of dyads comonomer units in the copolymer chains estimated by the Igarashi method based on the reactivity ratio does reveal a random distribution with a tendency toward alternation. The glass transition temperature of PEUGMA (46 °C) increased with the MMA content in the copolymer, and those of the copolymer fit well with the Johnston’s linearized expression. The TG analysis of pure PEUGMA revealed a significantly high thermal stability compared to that of PMMA. During its degradation, the preliminary decomposition was at 340 °C, and decreased as the MMA units increased in the copolymer. The DART-ToF-MS analysis revealed that the isothermal decomposition of PEUGMA led to a regeneration of raw materials such as EUGMA, GMA and EUG, in which the maximum amount was achieved at 450 °C.Keywords
This publication has 47 references indexed in Scilit:
- Polymer Grafting via ATRP Initiated from Macroinitiator Synthesized on SurfaceLangmuir, 2004
- Modification of demineralized bone matrix by a chemical routeJournal of Materials Chemistry, 2004
- Compatibilization of a poly(butylene terephthalate)/poly(ethylene octene) copolymer blends with different amounts of an epoxy resinJournal of Applied Polymer Science, 2003
- Reaction Kinetics and Morphological Changes of Reactive Polymer−Polymer InterfaceMacromolecules, 2003
- Compatibility and thermal properties of poly(3‐hydroxybutyrate)/poly(glycidyl methacrylate) blendsJournal of Polymer Science Part A: Polymer Chemistry, 2001
- Plasma polymerization and deposition of glycidyl methacrylate on Si(100) surface for adhesion improvement with polyimidePolymers for Advanced Technologies, 2001
- Reactive Block Copolymers for Modification of Thermosetting EpoxyMacromolecules, 2000
- Surface Modification of Fluoropolymers via Molecular DesignAdvanced Materials, 2000
- Use of glycidyl methacrylate monomers for developing cross-linkable pressure sensitive adhesivesEuropean Polymer Journal, 2000
- Epoxide-Functionalized Solid SurfacesChemistry of Materials, 2000