Phosphorus in Sintered Steels: Effect of Phosphorus Content and P Carrier in Sintered Steel Fe-C-P
Authors:
Open Access
- 1 October 2016
- journal article
- research article
- Published by Walter de Gruyter GmbH in Powder Metallurgy Progress
- Vol. 16 (1) , 1-13
Abstract
Phosphorus as an alloy element is quite common in powder metallurgy, the contents industrially used being markedly higher than those present in wrought steels. In this study, the influence of phosphorus addition through different P carriers was investigated. PM steels of the type Fe-0.7%C-x%P (x = 0.0 … 0.8%) were manufactured by pressing and sintering in H2. It showed that Fe3P is the best phosphorus carrier, resulting in fine and regular microstructure and in high impact energy data at 0.3 … 0.45%P while red P and also Fe2P showed a tendency to agglomeration, with resulting secondary porosity. At high P levels the mechanical properties tend to drop, for the tensile strength at P > 0.60%P while for the impact energy the threshold is 0.45%P. The dimensional behaviour of Fe-C-P can be related to PM aluminium alloys, expansion by transient liquid phase being followed by shrinkage by persistent liquid phase, at least at higher temperatures. In contrast to the dimensional behaviour, degassing and reduction is hardly affected by the phosphorus content.Keywords
This publication has 13 references indexed in Scilit:
- Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powdersPowder Metallurgy, 2005
- Effect of carbon and phosphorus addition on sintered density and effect of carbon removal on mechanical properties of high density sintered steelMaterials Science and Technology, 2004
- Liquid phase sintering of ferrous powder by carbon and phosphorus controlPowder Metallurgy, 2003
- Tensile and Fatigue Behaviour of Phosphorus Alloyed Sintered SteelsPowder Metallurgy, 1993
- Avoiding brittleness in iron-phosphorous alloysMetal Powder Report, 1993
- Sintering and Microstructure of Phosphorus SteelsPowder Metallurgy, 1992
- THE EFFECT OF PHOSPHORUS ADDITIONS ON THE TENSILE, FATIGUE, AND IMPACT STRENGTH OF SINTERED STEELS BASED ON SPONGE IRON POWDER AND HIGH-PURITY ATOMIZED IRON POWDERPowder Metallurgy, 1973
- Über phosphorlegierten SinterstahlArchiv für das Eisenhüttenwesen, 1953
- Die Beeinflussung der Sintereigenschaften von Metallpulvern durch eine OberflächenbehandlungArchiv für das Eisenhüttenwesen, 1953
- Editorial NoticesMedical Journal of Australia, 1940