Thermographic inspection of water ingress in composite honeycomb sandwich structure: a quantitative comparison among Lock-in thermography algorithms
- 6 December 2019
- journal article
- research article
- Published by Taylor & Francis in Quantitative InfraRed Thermography Journal
- Vol. 18 (2) , 92-107
Abstract
The increasing use of honeycomb structures in the aircraft industry has demonstrated the need for the development of more effective evaluation methodologies. In recent years, thermography has received vast and growing attention as a reliable technique for non-destructive testing and evaluation of composite materials due to its remarkable advantages of non-contact, full area coverage, high speed, safe and convenient operation, qualitative and quantitative inspection capabilities. In this paper, Lock-in thermography is employed to inspect water ingress in aircraft honeycomb structures, and an investigation into the effect of water content on the quantitative estimation has been carried out. A square-shaped composite honeycomb panel of dimension 300 × 300 mm with four equal size defective areas of 50 × 50 mm as the groups of cells filled with water by 25%, 50%, 75% and 100% of the cell volume was considered as a test sample. The sample was excited at multiple modulation frequencies, viz., 0.5 Hz, 0.2 Hz, 0.1 Hz, 0.05 Hz, 0.02 Hz, and 0.01 Hz. Three Lock-in thermography algorithms, namely, Fast Fourier transform, Harmonic approximation, and Principle component analysis, are discussed for quantitative assessment; and their performance is compared in terms of Signal to noise ratio.Keywords
Funding Information
- Kongju National University
This publication has 35 references indexed in Scilit:
- A combined approach of self-referencing and Principle Component Thermography for transient, steady, and selective heating scenariosInfrared Physics & Technology, 2010
- Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb StructuresResearch in Nondestructive Evaluation, 2009
- Neural network based nondestructive evaluation of sandwich compositesComposites Part B: Engineering, 2008
- Non-destructive evaluation of aerospace materials with lock-in thermographyEngineering Failure Analysis, 2006
- Detection of water ingress in composite sandwich structures: a magnetic resonance approachNDT & E International, 2005
- Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structuresComposite Structures, 2002
- Advances in pulsed phase thermographyInfrared Physics & Technology, 2002
- Evaluation of the In-Service Performance Behavior of Honeycomb Composite Sandwich StructuresJournal of Materials Engineering and Performance, 1999
- Manufacturing and applications of structural sandwich componentsComposites Part A: Applied Science and Manufacturing, 1997
- A Scanning Infrared Inspection System Applied to Nondestructive Testing of Bonded Aerospace StructuresApplied Optics, 1968