Graft interpenetrating polymer networks of polyurethane and epoxy. II. Toughening mechanism
Authors:
- 1 May 1990
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part B: Polymer Physics
- Vol. 28 (6) , 783-794
Abstract
Graft interpenetrating polymer networks (graft‐IPNs) of polyurethane (PU) and the diglycidyl ether of bisphenol A (epoxy) were prepared by first grafting excess PU prepolymer to the epoxy and then simultaneously polymerizing the PU prepolymer and epoxy. The fracture properties, at high shear rate (e.g., impact) and low shear rate (e.g., pseudostatic tensile fracture energy measurement) of these graft‐IPNs exhibit opposite behavior. Although dispersed rubber particles can enhance the Izod impact strength, toughening of the matrix of graft‐IPNs was found to be the main contribution. In contrast, it was found that a heterogeneous morphology with suitably dispersed rubber domains of appropriate size as well as the toughness of the matrix are requirements for effectively increasing the fracture energy at low shear rate. A reinitiating crack in the plastic matrix is proposed as the main toughening mechanism and can be invoked to interpret the fracture behavior at high and low shear rates of the graft‐IPNs.Keywords
This publication has 13 references indexed in Scilit:
- Graft interpenetrating polymer networks of polyurethane and epoxy. II. Toughening mechanismJournal of Polymer Science Part B: Polymer Physics, 1990
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Rubber‐modified epoxies. I. Transitions and morphologyJournal of Applied Polymer Science, 1981
- Comparison of laboratory techniques for evaluating the fracture toughness of glassy polymersJournal of Applied Polymer Science, 1980
- A model for the toughness of epoxy-rubber particulate compositesJournal of Materials Science, 1980
- Effect of grafting on phase volume fraction, composition, and mechanical behavior: Epoxy/poly (n‐butyl acrylate) simultaneous interpenetrating networksPolymer Engineering & Science, 1979
- Effect of Temperature on the Adhesive Fracture Behavior of an Elastomer-Epoxy ResinThe Journal of Adhesion, 1976
- The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesivesJournal of Applied Polymer Science, 1975
- Reinforced plastics developments: Review Article British Plastics, 42, No 8, pp 51 – 56 (August 1969)Composites, 1969