Crude palm oil as a complementary fuel for power generation in Amazonia: diesel engine performance, emissions, and economic assessment
Open Access
- 29 November 2019
- journal article
- research article
- Published by Universidade Estadual de Maringa in Acta Scientiarum. Technology
- Vol. 42, e43882
Abstract
This paper evaluates internal combustion engine performance parameters (Specific Fuel Consumption and engine torque) and pollutant emissions (O2, CO, and NOX), and also, provide an assessment of economic viability for operation in Amazonas state. Power supply to the communities in the Amazon region has as characteristics high costs for energy generation and low fare. Extractive activities include plenty of oily plant species, with potential use as biofuel for ICE (Diesel cycle) to obtain power generation together with pollutant emission reduction in comparison to fossil fuel. Experimental tests were carried out with five fuel blends (crude palm oil) and diesel, at constant angular speed (2,500 RPM – stationary regime), and four nominal engine loads (0%, 50%, 75%, and 100%) in a test bench dynamometer for an engine-driven generator for electrical-power, 4-Stroke internal combustion engine, Diesel cycle. Main conclusions are: a) SFC and torque are at the same order of magnitude for PO-00 (diesel) and PO-xx at BHP50/75/100%; b) O2 emissions show consistent decreasing behavior as BHP increases, compatible to a rich air-fuel ratio (λ > 1) and, at the same BHP condition, O2 (%) is slightly lower for higher PO-xx content; c) The CO emissions for PO-00 consistently decrease while the BHP increases, as for PO-xx those values present a non-linear behavior; at BHP75%-100_loads, CO emissions are higher for PO-20 and PO-25 in comparison to PO-00; d) The overall trend for NOX emissions is to increase, the higher the BHP; In general, NOx emissions are lower for PO-xx in comparison to PO-00, except for PO-10 which presents slightly higher values than PO-00 for all BHP range; e) Assessment on-trend costs indicates that using palm oil blends for Diesel engine-driven generators in the Amazon region is economically feasible, with an appropriate recommendation for a rated power higher than 800 kW.Keywords
This publication has 22 references indexed in Scilit:
- A review on the engine performance and exhaust emission characteristics of diesel engines fueled with biodiesel blendsEnvironmental Science and Pollution Research, 2018
- Effects of oxygen enriched combustion on pollution and performance characteristics of a diesel engineEngineering Science and Technology, an International Journal, 2016
- Production of palm and jatropha based biodiesel and investigation of palm-jatropha combined blend properties, performance, exhaust emission and noise in an unmodified diesel engineJournal of Cleaner Production, 2014
- Fueling a stationary direct injection diesel engine with diesel-used palm oil–butanol blends – An experimental studyEnergy Conversion and Management, 2013
- Adjusting the operating characteristics to improve the performance of an emulsified palm oil methyl ester run diesel engineEnergy Conversion and Management, 2013
- Crude palm oil fuel for diesel-engines: Experimental and ANN simulation approachesEnergy, 2011
- Use of palm oil-based biofuel in the internal combustion engines: Performance and emissions characteristicsEnergy, 2011
- Heat release and engine performance effects of soybean oil ethyl ester blending into diesel fuelEnergy, 2010
- Emissions and deposit characteristics of a small diesel engine when operated on preheated crude palm oilBiomass and Bioenergy, 2004
- Experimental evaluation of Diesel engine performance and emission using blends of jojoba oil and Diesel fuelEnergy Conversion and Management, 2004