Improved Metal–Semiconductor Interface in Monolayer (1L)-MoS2 via Thermally-Driven Ag Filaments as Atomic Scale Edge Contacts Triggered by Selective Annealing Process Using Long Wavelength (1064 nm) Pulsed Laser

Authors:

Abstract
Here, we explore the effectiveness of a pulsed laser annealing (PLA) process to trigger atomic scale edge contacts by Ag filaments in reducing the contact resistance of a MoS2 field-effect transistor (FET). Employing a long wavelength (1064 nm) pulsed laser, we anneal monolayer (1L)-MoS2 FETs with various metal electrodes, including Ag/Au, Ni/Au, and Cr/Au. A remarkable enhancement in FET performance could be achieved after the PLA treatment. Specifically, Ag/Au-contacted 1L-MoS2 FETs after the PLA treatment exhibit a peak field-effect mobility increase from 60 to 135 cm2 V-1 s-1 and an on-current improvement from 40.5 to 96.1 μA at a Vd of 1 V, accompanied by a significant decrease in contact resistance to 0.29 kΩ μm. PLA-treated 1L-MoS2 FETs showed a high on/off ratio of 107. TEM analysis provided insight into the mechanism of reduced contact resistance, revealing the thermally driven diffusion of Ag atoms into the 1L-MoS2 as Ag filaments to lateral contact with the edge of the 1L-MoS2, namely atomic scale edge contacts, as a key contributing factor. Furthermore, our investigation extends to the larger scale CVD-grown 1L-MoS2 films, where the PLA treatment demonstrates notable improvements in mobility, on-current, and on-off ratio.
Funding Information
  • National Science and Technology Council (113-2112-M-007-034 -MY3, 113-2119-M-007-015-MBK, 113-2628-E-007-020-, 113-2923-E-007-012-MY3)

This publication has 56 references indexed in Scilit: