Parametric Investigation of the Operating Limits and Performance Effects of Anode Off-Gas Recirculation in Ammonia-Fueled Solid Oxide Fuel Cell Systems for Marine Applications
Authors:
- Jaeyoung ParkJPJaeyoung Park
- Kwangnam JeongKJKwangnam Jeong
- Taewook LeeTLTaewook Lee
- Daehee KimDKDaehee Kim
- Jongsup HongJHJongsup Hong
Preprint
- 15 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Ammonia-fueled solid oxide fuel cell (SOFC) systems with anode off-gas recirculation (AOGR) offer high efficiency for marine power generation. In particular, ejector-aided AOGR can further improve electrical efficiency as it requires no external power. The system performance is strongly coupled to operating conditions and the AOGR ratio, but previous studies generally treat the AOGR ratio as a freely adjustable design input rather than a physically constrained outcome and examine its effect along a single operating axis. This study addresses these limitations by identifying the physically attainable maximum AOGR ratio and quantifying its relationships with fuel utilization, current density, and stack inlet temperature. The analysis is conducted using an integrated thermodynamic model with validated component models, implemented within a commercial thermodynamic simulator (H-Twin®). Results show that increasing fuel utilization from 40% to 80% raises the maximum AOGR ratio from 65.4% to 66.9%, whereas increasing current density from 0.1 to 0.5 A/cm² lowers it from 67.3% to 62.0%. Elevated stack inlet temperature further lowers this limit by degrading ejector performance. The AOGR ratio consistently improves efficiency while reducing power density, with the largest efficiency gains occurring at low fuel utilization. In addition, high temperature operation becomes less favorable as the AOGR ratio increases. At high current density, growing balance-of-plant parasitic power produces a non-monotonic efficiency trend, yielding an optimal AOGR ratio below its maximum allowable value. These findings demonstrate that the AOGR ratio, operating conditions, and system constraints must be co-optimized for effective ammonia-fueled SOFC system design.Keywords
This publication has 23 references indexed in Scilit:
- Numerical analysis of natural gas, hydrogen and ammonia fueled solid oxide fuel cell based micro cogeneration units with anodic gas recirculationInternational Journal of Hydrogen Energy, 2023
- Design improvements for ammonia-fed SOFC systems through power rating, cascade design and fuel recirculationInternational Journal of Hydrogen Energy, 2023
- Thermodynamic analysis of 100% system fuel utilization solid oxide fuel cell (SOFC) system fueled with ammoniaEnergy Conversion and Management, 2021
- A review of cleaner alternative fuels for maritime transportationEnergy Reports, 2021
- Route to zero emission shipping: Hydrogen, ammonia or methanol?International Journal of Hydrogen Energy, 2021
- Catalytic ammonia decomposition for hydrogen production on Ni, Ru and Ni Ru supported on CeO2International Journal of Hydrogen Energy, 2019
- Comparative study of solid oxide fuel cell-combined heat and power system designs for optimal thermal integrationEnergy Conversion and Management, 2019
- Experimental investigation on ejector performance near critical back pressureInternational Journal of Refrigeration, 2017
- SOFC operating with ammonia: Stack test and system analysisInternational Journal of Hydrogen Energy, 2016
- Ejector performance influence on a solid oxide fuel cell anodic recirculation systemJournal of Power Sources, 2004