Synthesis and characterization of novel polymer matrix composites reinforced with max phases (Ti3SiC2, Ti3AlC2, and Cr2AlC) or MoAlB by fused deposition modeling
Open Access
- 19 August 2019
- journal article
- research article
- Published by Wiley in International Journal of Ceramic Engineering & Science
- Vol. 1 (3) , 144-154
Abstract
In this paper, we report the synthesis and characterization of polylactic acid (PLA)‐MAX (Ti3SiC2, Ti3AlC2, and Cr2AlC) and PLA‐MoAlB composites by fused deposition modeling (FDM). Detailed scanning electron microscopy (SEM) studies showed that the particulate phases are uniformly dispersed in the PLA matrix of 3D‐printed samples. Differential scanning calorimetry (DSC) results showed that the addition of MAX phases promoted crystallization of PLA matrix as compared to MoAlB particulates. The mechanical testing results showed that the PLA matrix is sensitive to the addition of MAX or MoAlB phases, for example, PLA‐5 wt% Ti3SiC2, PLA‐5 wt% Ti3AlC2, and PLA‐5 wt% Cr2AlC had a UTS of ~39 MPa, ~30.5 MPa, and ~38.7 MPa as compared to ~41.5 MPa in pure PLA. Comparatively, PLA‐5 wt% MoAlB had a UTS of ~23.2 MPa which shows that predominantly amorphous PLA‐MoAlB composites have lower strength. The tribological behavior improved after the addition of 1 wt% additives, for example, in PLA‐Cr2AlC, the friction coefficient decreased by 76% to ~0.26 from ~0.34 in pure PLA, and the WR marginally decreased in PLA‐1 wt% Cr2AlC to ~2.2 × 10−5 mm3/Nm as compared to 7.7 × 10−5 mm3/Nm in PLA. SEM investigations of the tribosurfaces showed the tribology is governed by the formation of tribofilms. The wettability study showed that all the 3D‐printed samples are hydrophilic in nature.Keywords
This publication has 23 references indexed in Scilit:
- PLA based biocomposites reinforced with Posidonia oceanica leavesComposites Part B: Engineering, 2018
- Chemistry of Lactic Acid2017
- Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA compositesJournal of Cleaner Production, 2017
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive reviewAdvanced Drug Delivery Reviews, 2016
- Study on Structural, Electronic, Optical and Mechanical Properties of MAX Phase Compounds and Applications Review ArticleAmerican Journal of Modern Physics, 2015
- Thermal and mechanical properties of polylactic acid (PLA) and bagasse carboxymethyl cellulose (CMCB) composite by adding isosorbide diestersAIP Conference Proceedings, 2015
- MAX Phases2013
- Mechanical Property of Surface Modified Natural Fiber Reinforced PLA BiocompositesEnergy Procedia, 2013
- Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release StudiesComprehensive Reviews in Food Science and Food Safety, 2010
- The MAX Phases: Unique New Carbide and Nitride MaterialsAmerican Scientist, 2001