Sub-100-Hz DFB Laser Injection-Locked to PM Fiber Ring Cavity
Open Access
- 1 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (8) , 2928-2937
Abstract
Low-noise lasers are invaluable tools in applications ranging from precision spectroscopy and displacement measurements to the development of advanced optical atomic clocks. Although all these applications benefit from reduced frequency noise, some also demand a low-cost and robust design. In this work, we introduce a novel and practical concept of a simple, single-frequency laser that utilizes a ring fiber cavity for self-injection locking of a standard semiconductor distributed feedback (DFB) laser. Contrary to previously reported solutions, our laser configuration is fully spliced from polarization-maintaining (PM) single-mode optical fiber components. This results in an adjustment- and maintenance-free narrow-band laser operation with significantly enhanced stability against environmental noise. Importantly, continuous-wave (CW) single-frequency laser operation is achieved through self-injection locking, while the low-bandwidth active optoelectronic feedback serves exclusively to maintain this regime. Operating with output powers of ∼8 mW, the proposed fiber configuration narrows the natural Lorentzian linewidth of the emitted light to ∼ 75 Hz and ensures phase and intensity noise levels of less than – 120 dBc/Hz (> 10 kHz) and – 140 dBc/Hz (> 30 kHz), respectively. Furthermore, the thermally stabilized laser exhibits a frequency drift of less than ∼ 0.5 MHz/min with a maximal frequency walk-off of < 8 MHz. We believe that translating this laser design to integrated photonics in the near future could dramatically lower costs and reduce the footprint in various applications, including ultra-high-capacity fiber and data center networks, atomic clocks, and microwave photonics.Keywords
This publication has 60 references indexed in Scilit:
- Sub-kHz-linewidth laser generation by self-injection locked distributed feedback fiber laserOptics & Laser Technology, 2023
- Active stabilization of multi-parameter in AMO experiments with a single digital servoOptics & Laser Technology, 2023
- Recent advances in laser self-injection locking to high-Q microresonatorsFrontiers of Physics, 2023
- Self‐Injection Locked Frequency Conversion LaserLaser & Photonics Reviews, 2023
- Stability in self-injection locking of the DFB laser through a fiber optic resonatorOptics Communications, 2022
- Sub-kilohertz Brillouin fiber laser with stabilized self-injection locked DFB pump laserOptics & Laser Technology, 2021
- Laser frequency noise measurement using an envelope-ratio method based on a delayed self-heterodyne interferometerOptics Communications, 2019
- Self-injection-locking linewidth narrowing in a semiconductor laser coupled to an external fiber-optic ring resonatorOptics Communications, 2017
- Self-injection locking of the DFB laser through an external ring fiber cavity: Polarization behaviorResults in Physics, 2016
- Locking of the DFB laser through fiber optic resonator on different coupling regimesOptics Communications, 2016