A 94 GHz, 1.4 dB Insertion Loss Single-Pole Double-Throw Switch Using Reverse-Saturated SiGe HBTs
Authors:
- 12 November 2013
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 24 (1) , 56-58
Abstract
This work demonstrates two 94 GHz SPDT quarter-wave shunt switches using saturated SiGe HBTs. A new mode of operation, called reverse saturation, using the emitter at the RF output node of the switch, is utilized to take advantage of the higher emitter doping and improved isolation from the substrate. The switches were designed in a 180 nm SiGe BiCMOS technology featuring 90 nm SiGe HBTs (selective emitter shrink) with fT/fmax of 250/300+ GHz. The forward-saturated switch achieves an insertion loss and isolation at 94 GHz of 1.8 dB and 19.3 dB, respectively. The reverse-saturated switch achieves a similar isolation, but reduces the insertion loss to 1.4 dB. This result represents a 30% improvement in insertion loss in comparison to the best CMOS SPDT at 94 GHz.Keywords
This publication has 5 references indexed in Scilit:
- A BiCMOS W-Band 2×2 Focal-Plane Array With On-Chip AntennaIEEE Journal of Solid-State Circuits, 2012
- Design and Characterization of $W$-Band SiGe RFICs for Passive Millimeter-Wave ImagingIEEE Transactions on Microwave Theory and Techniques, 2010
- Multiple-Throw Millimeter-Wave FET Switches for Frequencies from 60 up to 120 GHz2008
- A 94 GHz monolithic switch with a vertical PIN diode structure2005
- Coplanar W-Band SPDT and SPTT Resonated PIN Diode Switches1999