Mechanism and Elimination of Scan Blindness in a T-Printed Dipole Array
- 19 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (1) , 242-253
Abstract
In this paper, the scan blindness in a T-printed dipole is analyzed, and an elimination strategy is proposed. First, the main cause of scan blindness is analyzed. The scan characteristics are obtained using an active element pattern (AEP) with an infinite rectangular lattice arrangement. Based on the propagation of a guided wave along the antenna row and the electric-field distribution observed during simulations, an equivalent circuit model for a unit cell of the T-printed dipole is obtained. A quasi-transverse electromagnetic (TEM) guided wave is predicted using the dispersion relation curve obtained from the equivalent circuit, and it is proved that the calculated curve is in good agreement with the eigen mode simulations and measured trajectory of the scan blind angle, for different frequencies. Next, slits and stubs are introduced as parasitic structures, to eliminate the scan blindness and improve the antenna scan range. To confirm the effects of these parasitic elements, a linear array simulation is performed, which confirms the suppression of a quasi-TEM guided wave. Analysis of the active reflection coefficient and dispersion diagram indicates that the scan characteristics have been improved by the addition of parasitics. Four types of array prototypes are fabricated and their measurements validate the scan blindness prediction and confirm the proposed mechanism of scan blindness and its improvements.Keywords
Funding Information
- National Research Foundation of Korea (2016R1E1A1A01943375)
- Hanwha System
This publication has 30 references indexed in Scilit:
- WIDE SCANNING PHASED ARRAY ANTENNA USING PRINTED DIPOLE ANTENNAS WITH PARASITIC ELEMENTProgress In Electromagnetics Research Letters, 2008
- Scan Blindness Free Phased Array Design Using PBG MaterialsIEEE Transactions on Antennas and Propagation, 2004
- A New Millimeter-Wave Printed Dipole Phased Array Antenna Using Microstrip-Fed Coplanar Stripline Tee JunctionsIEEE Transactions on Antennas and Propagation, 2004
- T-dipole arrays for mobile applicationsIEEE Antennas and Propagation Magazine, 2003
- Scan performance of infinite arrays of microstrip-fed dipoles with bent arms printed on protruding substratesIEEE Transactions on Antennas and Propagation, 1995
- The active element patternIEEE Transactions on Antennas and Propagation, 1994
- Analysis of infinite arrays of microstrip-fed dipoles printed on protruding dielectric substrates and covered with a dielectric radomeIEEE Transactions on Antennas and Propagation, 1994
- Finite phased arrays of rectangular microstrip patchesIEEE Transactions on Antennas and Propagation, 1986
- Analysis of finite phased arrays of printed dipolesIEEE Transactions on Antennas and Propagation, 1985
- Analysis of an infinite array of rectangular microstrip patches with idealized probe feedsIEEE Transactions on Antennas and Propagation, 1984