A CMOS MEMS Pirani vacuum gauge with complementary bump heat sink and cavity heater
Authors:
- 1 January 2014
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10846999,p. 676-679
Abstract
A novel CMOS-MEMS Pirani vacuum gauge with complementary bump heat-sink and cavity heater design has been proposed and demonstrated. This design using CMOS-MEMS process to offer the following advantages for Pirani gauge: (1) The bump heat-sink vertical integrates with cavity heater increases the dynamic range and sensitivity without changing device footprint size, (2) The cavity in heater reduces the thermal mass for low-power operation, and (3) Easy integration with packaged CMOS-MEMS devices for pressure monitoring [1]. The design is implemented using the standard TSMC 0.18μm 1P6M CMOS process. A 120μm×120μm die size with 0.53μm sensing gap is demonstrated. Measurement indicates the gauge has sensing range 0.3-100torr with sensitivity of 1.53×10 4 (K/W)/torr. The power consumption is 67μW for 1% resistance change. In comparison, the gauge with typical heat-sink/heater design has sensing range 1-100torr with sensitivity of 0.99×10 4 (K/W)/torr and power consumption of 119μW.Keywords
This publication has 9 references indexed in Scilit:
- A Tube-Shaped Buried Pirani Gauge for Low Detection Limit With Small FootprintJournal of Microelectromechanical Systems, 2011
- Design and application of a metal wet-etching post-process for the improvement of CMOS-MEMS capacitive sensorsJournal of Micromechanics and Microengineering, 2009
- The nanogap Pirani—a pressure sensor with superior linearity in an atmospheric pressure rangeJournal of Micromechanics and Microengineering, 2009
- Pirani Vacuum Gauges Using Silicon-on-Glass and Dissolved-Wafer Processes for the Characterization of MEMS Vacuum PackagingIEEE Sensors Journal, 2009
- An Improved Performance Poly-Si Pirani Vacuum Gauge Using Heat-Distributing Structural SupportsJournal of Microelectromechanical Systems, 2008
- A micromachined Pirani gauge with dual heat sinksIEEE Transactions on Advanced Packaging, 2005
- Vacuum packaging technology using localized aluminum/silicon-to-glass bondingJournal of Microelectromechanical Systems, 2002
- Miniaturized thin film thermal vacuum sensorJournal of Vacuum Science & Technology A, 1995
- Microfabricated thermal absolute-pressure sensor with on-chip digital front-end processorIEEE Journal of Solid-State Circuits, 1991