Robust Optimization of Dynamic Vibration Absorber Array for Vibration Attenuation of Mistuned Bladed Disk
Authors:
- 8 September 2025
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 148 (1)
Abstract
Integral blisks are prone to large vibration amplitudes due to their low intrinsic damping level, especially for the mistuned cases. Dynamic vibration absorber arrays (DVAAs) have been shown to be an effective vibration attenuation approach for blisks. Nevertheless, its performance tends to degrade remarkably at large mistuning conditions. Regarding this issue, an effective optimization approach is addressed to enhance the robustness of the performance of DVAA for a mistuned blisk by introducing intentional deviation to the natural frequencies of the DVAs. A novel area-based index considering the random character of mistuning is developed for quantifying the robustness enhancement effectiveness. The Kriging surrogate model is utilized to establish a nonlinear mapping relationship between the index and the parameters of DVAA, and an iterative process is used to improve the optimization efficiency. Both a lumped parameter model and a finite element model of a blisk are adopted to verify the presented approach. The results reveal that the optimized frequency parameter of DVAs can substantially improve vibration suppression performance at medium and large mistuning conditions while maintaining the performance at small mistuning. The proposed optimization approach can obviously enhance the robustness of the vibration attenuation performance of DVAA for the blisk with large mistuning levels.Keywords
Funding Information
- Natural Science Foundation of Anhui Province (2408085ME120)
- Natural Science Foundation of Hubei Province (2024AFB973)
This publication has 22 references indexed in Scilit:
- Reduced-Order Modeling for the Coupling Vibration Analysis of Bladed Rotors Supported by Journal BearingsJournal of Vibration Engineering & Technologies, 2023
- Multi-mode vibration attenuation of mistuned bladed disks by frictional tuned mass dampers arrayJournal of Sound and Vibration, 2022
- Geometric design of friction ring dampers in blisks using nonlinear modal analysis and Kriging surrogate modelStructural and Multidisciplinary Optimization, 2022
- Robust design optimisation of underplatform dampers for turbine applications using a surrogate modelJournal of Sound and Vibration, 2021
- Dynamic model order reduction of blisks with nonlinear damping coatings using amplitude dependent mistuningInternational Journal of Non-Linear Mechanics, 2019
- Nonlinear dynamics of mistuned bladed disks with ring dampersInternational Journal of Non-Linear Mechanics, 2017
- Efficient computational techniques for mistuning analysis of bladed discs: A reviewMechanical Systems and Signal Processing, 2017
- A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disksInternational Journal of Mechanical Sciences, 2011
- Kriging metamodeling in simulation: A reviewEuropean Journal of Operational Research, 2009
- Qualitative analysis of forced response of blisks with friction ring dampersEuropean Journal of Mechanics - A/Solids, 2007