Optimization of Parameters in Laser Powder Bed Fusion TA15 Titanium Alloy Using Taguchi Method
Open Access
- 29 September 2022
- Vol. 12 (10) , 1385
Abstract
In this work, laser powder bed fusion (LPBF) was explored to fabricate TA15 (Ti-6Al-2Zr-1Mo-1V) titanium alloy based on the experimental design obtained by using the Taguchi method. The impact of processing parameters (including laser power, scanning speed, and scanning interval) on the density and microhardness of the as-LPBFed TA15 titanium alloy was analyzed using the Taguchi method and analysis of variance (ANOVA). The interaction among parameters on the density of the as-LPBFed TA15 titanium alloy was indicated by a response surface graph (RSR). When the laser energy density was adjusted to 100 J/mm3, the highest relative density could reach 99.7%. The further increase in the energy input led to the reduction in relative density, due to the formation of tiny holes caused by the vaporization of material at a high absorption of heat. Furthermore, in order to better reveal the correlation between relative density and processing parameters, the regression analysis was carried out for relative density. The results showed that the experimental and predicted values obtained by the regression equation were nearly the same.Keywords
Funding Information
- Natural Science Foundation of Zhejiang Province (2021C01023, 52105334, 2021JJ40206, 2022JJ20025, 2022GK2043, JJKH20210733KJ)
- National Natural Science Foundation of China (2021C01023, 52105334, 2021JJ40206, 2022JJ20025, 2022GK2043, JJKH20210733KJ)
- Natural Science Foundation of Hunan Province of China (2021C01023, 52105334, 2021JJ40206, 2022JJ20025, 2022GK2043, JJKH20210733KJ)
- Key Research and Development Program of Hunan Province of China (2021C01023, 52105334, 2021JJ40206, 2022JJ20025, 2022GK2043, JJKH20210733KJ)
- Education Department of Jilin Province (2021C01023, 52105334, 2021JJ40206, 2022JJ20025, 2022GK2043, JJKH20210733KJ)
This publication has 50 references indexed in Scilit:
- Dilution of Al and V through laser powder deposition enables a continuously compositionally Ti/Ti6Al4V graded structureJournal of Alloys and Compounds, 2018
- The effect of SiC addition on the dimensional stability of Al-Cu-Mg alloyJournal of Alloys and Compounds, 2018
- Microstructure and properties of Ti/Al lightweight graded material by direct laser depositionMaterials Science and Technology, 2018
- Effect of multi-directional forging on the microstructure and mechanical properties of TiBw/TA15 composite with network architectureMaterials & Design, 2017
- Effect of atomization pressure on the breakup of TA15 titanium alloy powder prepared by EIGA method for laser 3D printingVacuum, 2017
- Additive manufacturing of alumina using laser engineered net shaping: Effects of deposition variablesCeramics International, 2017
- Effect of workpiece size on microstructure evolution of different regions for TA15 Ti-alloy isothermal near-β forging by local loadingJournal of Materials Processing Technology, 2015
- Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties developmentMaterials & Design (1980-2015), 2015
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturingJournal of Materials Processing Technology, 2014
- A study of the microstructural evolution during selective laser melting of Ti–6Al–4VActa Materialia, 2010