Ultra-Rapid Crystal Growth of Textured SiC Using Flash Spark Plasma Sintering Route
Authors:
Open Access
- 3 March 2016
- journal article
- research article
- Published by American Chemical Society (ACS) in Crystal Growth & Design
- Vol. 16 (4) , 2317-2321
Abstract
A novel processing route that induces simultaneous densification and texturing of SiC ceramics by Flash Spark Plasma Sintering (FSPS) is reported. Unlike hot forging (which produces texturing in a direction orthogonal to the load as a result of plastic deformation), FSPS produced texturing parallel to the pressing direction. The texturing was driven by a thermal gradient generated within the sample along its axial direction due to the higher electrical resistivity of SiC compared to the pressing graphite punch (the sample midthickness was hotter than the surfaces in contact with the graphite punches). In FSPSed SiC samples, the microstructure consisted of large SiC plate-like elongated crystals (thickness between 40 and 100 μm, width up to 500 μm) with their c-axis (slow growth direction) orthogonal to the Physical Vapor Transport (PVT) direction. The mechanisms producing densification and texture were studied for SiC with and without boron carbide sintering additives. In order to achieve a dense and textured portion of the sample, the presence of a liquid phase during sintering was necessary.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/K008749/1)
- European Commission
- National Research Foundation of Korea
This publication has 19 references indexed in Scilit:
- Flash Spark Plasma Sintering ( FSPS ) of α and β SiCJournal of the American Ceramic Society, 2016
- Ultra-high temperature spark plasma sintering of α-SiCCeramics International, 2015
- Flash Spark Plasma Sintering ( FSPS ) of Pure ZrB 2Journal of the American Ceramic Society, 2014
- Preliminary investigation of flash sintering of SiCJournal of the European Ceramic Society, 2013
- Electric Field Assisted Sintering of Cubic Zirconia at 390°CJournal of the American Ceramic Society, 2013
- An experimental setup for shrinkage evaluation during electric field-assisted flash sintering: Application to yttria-stabilized zirconiaJournal of the European Ceramic Society, 2013
- Flash Sintering of Nanograin Zirconia in <5 s at 850°CJournal of the American Ceramic Society, 2010
- Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008Science and Technology of Advanced Materials, 2009
- Directional electromigration-enhanced interdiffususion in the Cu–Ni systemJournal of Applied Physics, 2007
- Electromigration in metalsReports on Progress in Physics, 1989