Effects of Monomer Composition of Urethane Methacrylate Based Resins on the C=C Degree of Conversion, Residual Monomer Content and Mechanical Properties
Authors:
- Codruta SarosiCodruta Sarosi
- Marioara MoldovanMMMarioara Moldovan
- Andrada SoancaAndrada Soanca
- Alexandra RomanARAlexandra Roman
- Timea GhermanTGTimea Gherman
- Ancuta TrifoiATAncuta Trifoi
- Andrea Maria ChisnoiuAndrea Maria Chisnoiu
- Stanca CucStanca Cuc
- Miuta FilipMFMiuta Filip
- Georgiana Florentina GheorgheGGGeorgiana Florentina Gheorghe
- Radu Marcel ChisnoiuRadu Marcel Chisnoiu
Open Access
Abstract
(1) Background: This study investigated the influence of Bis-GMA, TEGDMA, UDMA, and two different polyethylene glycol (PEG)-containing, UDMO-based co-monomers on the Young’s modulus and flexural strength, degree of methacrylate C=C double bond conversion and residual monomer elution of experimental dental resins. (2) Methods: Urethane methacrylate-based monomer was synthesised via a radical chain growth polymerization mechanism using PEG in order to improve the mechanical properties. Dental resins were formulated using Bis-GMA, UDMA, or UDMO as base monomers combined with TEGDMA as a dilution monomer and DMAEM + CQ as the photo-initiator system. Degree of conversion (DC), mechanical properties, and residual monomer content of light-activated methacrylate resin formulations were evaluated and statistically analysed by ANOVA and a Tukey’s test. (3) Results: PEG-containing UDMO resins had lower Young’s modulus and elastic strength than UDMA-derived resin for all irradiation times. The highest DC (67,418%) was observed for the PEG-containing UDMO-based resin formulation when light cured for 40 s. For all samples, DC increased with the photo-polymerization time. The amount of residual monomer decreased after increasing the light-curing period from 20 to 40 s, resin with UDMO content 0.01 mol of PEG having the smallest amount of free eluted monomer. (4) Conclusions: A strong structure–property relationship exists in photo-cured dimethacrylate-based dental resins. The time and quantity of the photochemical initiation system can influence the physical–mechanical properties of the resins but also the monomers in their composition.Keywords
Funding Information
- Romanian Program of Research, Development and Innovation (PN-III-P2-2.1-PED-2019-2953, PNCDI II – PT-PCCA-127/2014, Project 334 PED/2020)
This publication has 33 references indexed in Scilit:
- Preparation and Evaluation of Dental Resin with Antibacterial and Radio-Opaque FunctionsInternational Journal of Molecular Sciences, 2013
- Synthesis of a novel tertiary amine containing urethane dimethacrylate monomer (UDMTA) and its application in dental resinJournal of Materials Science: Materials in Medicine, 2013
- Progress in dimethacrylate-based dental composite technology and curing efficiencyDental Materials, 2013
- Structure–property relationship in new photo-cured dimethacrylate-based dental resinsDental Materials, 2012
- Characterization of dimethacrylate polymeric networks: A study of the crosslinked structure formed by monomers used in dental compositesEuropean Polymer Journal, 2011
- Resin composite—State of the artDental Materials, 2011
- Urethane dimethacrylate oligomers for dental composite matrix: Synthesis and propertiesPolymer Engineering & Science, 2009
- Synthesis and evaluation of modified urethane dimethacrylate resins with reduced water sorption and solubilityDental Materials, 2009
- Network structure of Bis-GMA- and UDMA-based resin systemsDental Materials, 2006
- A classification of dental composites according to their morphological and mechanical characteristicsDental Materials, 1992