Spark Plasma Sintering of Boron Carbide and Effects of Various Additives on Sintering and Material Properties
Authors:
- 27 October 2010
- conference paper
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 63, 79-84
Abstract
The aim of this study was to produce dense and mechanically strong boron carbide ceramics with the help of different oxide additives. Physical properties of two different grades of pure boron carbide powders were analysed and sintered by Spark Plasma Sintering method. Starting powders were prepared by ball milling with the addition of 5 wt. % Y2O3, Al2O3, SiO2 and Y2O3 + Al2O3. In the sintering step, powder mixtures were sintered by SPS method in round-shaped graphite dies under 50 MPa for 5 minutes in the range of 1700-1800oC. In the characterization step, sintered sample compositions and microstructures were characterized by XRD and SEM analysis respectively. The hardness values were measured under 1000 g load and the density values were measured with Archimedes' principle. The fracture toughness analysis were also carried out.Keywords
This publication has 10 references indexed in Scilit:
- Microstructural characterization of spark plasma sintered boron carbide ceramicsCeramics International, 2010
- Effect of zirconia addition on pressureless sintering of boron carbideCeramics International, 2008
- The effect of Fe addition on the densification of B4C powder by spark plasma sinteringPowder Metallurgy and Metal Ceramics, 2007
- B4C/metal boride composites derived from B4C/metal oxide mixturesJournal of the European Ceramic Society, 2007
- Hardness and wear resistance of B4C ceramics prepared with several additivesMaterials Letters, 2005
- Pressureless Sintering of Boron CarbideJournal of the American Ceramic Society, 2003
- Boron Carbide–Zirconium Boride In Situ Composites by the Reactive Pressureless Sintering of Boron Carbide–Zirconia MixturesJournal of the American Ceramic Society, 2001
- Densification and Mechanical Properties of B4C with Al2O3 as a Sintering AidJournal of the American Ceramic Society, 2000
- A novel approach for the preparation of B4C-based cermetsInternational Journal of Refractory Metals and Hard Materials, 2000
- Boron carbide—A comprehensive reviewJournal of the European Ceramic Society, 1990