Effect of Mn Additions on the Corrosion Behavior of Mould-Cast Magnesium ASTM AZ91
Authors:
- 1 May 1987
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 43 (5) , 291-295
Abstract
One of the major causes of magnesium corrosion is the presence of iron as an impurity in commercial alloys. Alloying the material with manganese may reduce the corrosion rate to acceptable levels. The corrosion rate of a Mg-9% Al-1% Zn alloy, containing varying amounts of Mn and Fe, correlates with the Fe:Mn ratio in the alloy and in the aluminum-base intermetallics. The ratio is suggested to be the basic parameter determining the corrosion rate for a given thermomechanical history.Keywords
This publication has 11 references indexed in Scilit:
- Corrosion of Magnesium at High Anodic PotentialsJournal of the Electrochemical Society, 1983
- Elektrochemische Untersuchungen an aluminiumreichen intermetallischen PhasenMaterials and Corrosion, 1980
- Technical Note: Effects of Manganese on the Electrode or Free Corrosion Potentials of AluminumCorrosion, 1980
- The corrosion of magnesium in aqueous solution containing chloride ionsCorrosion Science, 1977
- Magnesium as a Passive MetalJournal of the Electrochemical Society, 1963
- The Anodic Dissolution of Binary AlloysJournal of the Electrochemical Society, 1962
- Electrochemical Behavior of the Magnesium AnodeJournal of the Electrochemical Society, 1961
- Corrosion of Anodically and Cathodically Polarized Magnesium in Aqueous MediaJournal of the Electrochemical Society, 1958
- Effect of Alloying and Impurity Elements In Magnesium Alloy Cast AnodesCorrosion, 1954
- Magnesium as a Galvanic Anode: Some Factors Affecting Its PerformanceTransactions of The Electrochemical Society, 1946